Canon mp495 User Manual download pdf (Page 721)

100

101

Infrastructure

Connects the printer to the wireless LAN with an access point.

SSID

The SSID of the wireless LAN is displayed.

Note

Enter the same SSID that the access point is configured to use. The SSID is case-

sensitive.

The Search dialog box is displayed to select an access point to connect to.

Search dialog box

Note

When the Canon IJ Network Tool runs over a LAN, the button is grayed out and cannot be

selected. Connect the printer and the computer with a USB cable temporarily to change

the settings.

4. Encryption Method

Select the encryption method used over the wireless LAN.

Important

If all encryption types of the access point, printer, or computer do not match, the printer

cannot communicate with the computer. If the printer cannot communicate with the

computer after the encryption type of the printer was switched, make sure that encryption

types for the computer and the access point matches that set to the printer.

How to Set a WEP/WPA/WPA2 Key

If you connect to a network that is not protected with security measures, there is a risk of

disclosing data such as your personal information to a third party.

Do not use

Select to disable encryption.

Use WEP

Transmission is encrypted using a WEP key you specified.

If a WEP key has not been set, the WEP Details dialog box is displayed automatically. To

change WEP settings set before, click Configuration to display the dialog box.

WEP Details dialog box

Use WPA/Use WPA2

Transmission is encrypted using a WPA or WPA2 key you specified.

The security has been strengthened more than WEP.

If a WPA or WPA2 key has not been set, the Authentication Type Confirmation dialog box is

displayed automatically. To change WPA or WPA2 settings set before, click Configuration to

display the WPA Details dialog box or WPA2 Details dialog box.

Changing the WPA or WPA2 Detailed Settings

Configuration

The detailed settings dialog box is displayed. The WEP, the WPA, or the WPA2 key selected in

Encryption Method can be confirmed and changed.

For details on WEP setting:

WEP Details dialog box

For details on WPA or WPA2 setting:

Changing the WPA or WPA2 Detailed Settings

6. TCP/IP Setup

Sets the IP address of the printer to be used over the LAN. Set a value appropriate for your

network environment.

Get IP address automatically

Select this option to use an IP address automatically assigned by a DHCP server. DHCP server

functionality must be enabled on your wireless LAN router or access point.

Page 721 of 759 pagesChanging the Settings in the Wireless LAN Sheet

1 ... 720 721 722 ... 759

Comments to this Manuals

No comments

Canon mp495 User Manual Page 721

Comments to this Manuals

Related products and manuals for Printers Canon mp495