Canon mx860 User Manual Page 142

  • Download
  • Add to my manuals
  • Print
  • Page
    / 997
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 141
Advanced Guide
Troubleshooting
Contents
> Routine Maintenance >
When Printing Becomes Faint or Colors Are Incorrect
> Cleaning the Print Head
Cleaning the Print Head
Clean the Print Head if lines are missing or if horizontal white streaks are present in the printed nozzle
check pattern. Cleaning unclogs the nozzles and restores the print head condition. Cleaning the Print
Head consumes ink, so clean the Print Head only when necessary.
Y
ou need to prepare: a sheet of A4 or Letter-sized plain pape
r
1.
Make sure that the power is turned on.
See
Operation Panel
.
2.
Make sure that one or more sheets of A4 or Letter-sized plain paper are loaded in
the Cassette.
3.
Open the Paper Output Tray gently, and open the Output Tray Extension.
4.
Clean the Print Head.
(1)
Press the
Menu
button.
(2)
Use the (Left) or (Right) button to select Settings , and press the
OK
button.
The Settings screen will appear.
(3)
Use the (Left) or (Right) button to select Maintenance , and press the
OK
button.
The Maintenance screen will appear.
(4)
Use the
(Up) or
(Down) button to select Cleaning, and press the
OK
button.
The confirmation screen will appear.
(5)
Use the
(Up) or
(Down) button to select Yes, and press the
OK
button.
The machine starts cleaning the Print Head.
Do not perform any other operations until the machine completes the cleaning of the Print Head. This takes
about 1 minute 30 seconds.
The pattern print confirmation screen will appear.
(6)
Use the
(Up) or
(Down) button to select Yes, and press the
OK
button.
The nozzle check pattern will be printed.
5.
Check the nozzle check pattern.
See
Examining the Nozzle Check Pattern
.
Page 142 of 997 pagesCleaning the Print Head
Page view 141
1 ... 141 142 143 ... 997

Comments to this Manuals

No comments