Canon PIXMA MG3220 series Service Manual Page 65

  • Download
  • Add to my manuals
  • Print
  • Page
    / 224
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 64
Electrostatic discharge
CAUTION: The product contains components that are sensitive to electrostatic discharge
(ESD). Always perform service work at ESD-protected workstation. If an ESD-protected workstation is
not available, discharge body static by grasping the print engine chassis before touching an ESD-
sensitive component. Ground the print engine chassis before servicing the product.
Required tools
#2 Phillips screwdriver with magnetic tip
Small flat-blade screwdriver
Long flat-blade screwdriver
Needle-nose pliers
ESD mat (if one is available)
Penlight (optional)
CAUTION: Always use a Phillips screwdriver (callout 1). Do not use a pozidrive screwdriver (callout 2)
or any motorized screwdriver. These can damage screws or screw threads.
Do not pull directly on the wires to disconnect them. Always pull on the plastic body of a connector to
avoid damaging the connector wires.
Figure 5-1 Phillips and pozidrive screwdriver comparison
Before performing service
If possible, print a configuration page (to record customer settings) and menu map report. See
Information pages on page 30.
Remove all media from the product and remove the input tray.
Turn off the power by using the power switch.
Unplug the power and interface cables.
ENWW Removal and replacement strategy 49
Page view 64
1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 223 224

Comments to this Manuals

No comments