Canon DR-M160 User Manual download pdf (Page 16)

Before Using the Scanner

Important Safety Instructions

To ensure the safe operation of this scanner, be sure to read the

safety warnings and precautions described below.

Installation Location

The performance of this scanner is affected by the environment in

which it is installed. Make sure that the location where the scanner is

installed meets the following environmental requirements.

● Provide adequate space around the scanner for operation,

maintenance, and ventilation.

● Provide adequate space in front of the scanner for documents

output after being scanned.

● Avoid installing the machine in direct sunlight. If this is unavoidable,

use curtains to shade the scanner.

● Avoid locations where a considerable amount of dust accumulates

as dust may adversely affect the inside of the scanner.

● Avoid warm or humid locations, such as in the vicinity of a water

faucet, water heater, or humidifier. Avoid locations where ammonia

gas is emitted. Avoid locations near volatile or flammable materials,

such as alcohol or paint thinner.

● Avoid locations that are subject to vibration.

● Avoid exposing the scanner to rapid changes in temperature. If the

room in which the scanner is installed is cold but rapidly heated,

water droplets (condensation) may form inside the scanner. This

may result in a noticeable degradation in scanning quality. The

following conditions are recommended for optimal scanning quality:

Room temperature: 10 °C to 32.5 °C (50 °F to 90.5 °F)

Humidity: 20% to 80% RH

● Avoid installing the scanner near equipment that generates a

magnetic field (e.g. speakers, televisions, or radios.)

AC Adapter

● Connect only to a power outlet of the rated voltage and power

supply frequency (120 V, 60 Hz or 220-240 V, 50/60 Hz depending

on your region).

● Do not connect other electrical equipment to the same power outlet

to which the scanner is connected. Also, when using an extension

cord, make sure that the extension cord is rated for the current

requirements of the scanner.

● Never try to take the AC adapter apart or modify it in any way, as

this is dangerous.

● The power cord may become damaged if it is often stepped on or if

heavy objects are placed on it.

● Do not use the power cord while it is coiled.

● Do not pull directly on the power cord. When disconnecting the

power cord, grasp the plug and remove it from the outlet.

● Keep the area around the power cord clear of objects so that the

power cord can be disconnected easily in an emergency.

● Do not use an AC adapter other than the one provided with the

scanner. Do not use the AC adapter provided with the scanner with

other products.

● If you have any questions regarding the power supply, contact your

local authorized Canon dealer or service representative for further

information.

100mm

(3.94")

100mm (3.94")

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 84 85

Comments to this Manuals

No comments

Canon DR-M160 User Manual Page 16

Comments to this Manuals

Related products and manuals for Scanner Transparancy Adapters Canon DR-M160