Canon DR-M160 User Manual download pdf (Page 17)

Moving the Scanner

● When moving the scanner, always hold it with both hands to avoid

dropping it.

● Make sure to disconnect the interface cable and AC adapter before

moving the scanner. If the scanner is transported with these items

connected, the plugs and connectors may be damaged.

Handling

WARNING

Note the following precautions whenever using the scanner. Failure to

do so may result in a fire or electric shock.

● Never use alcohol, benzene, paint thinner, aerosol sprays, or any

other highly flammable substance near the scanner.

● Do not cut, damage, or modify the power cord. Do not place heavy

objects on the power cord, and do not pull or excessively bend the

power cord.

● Never connect the power cord when your hands are wet.

● Do not connect the scanner to a multi plug power strip.

● Do not knot or coil the power cord as this may result in a fire or

electric shock. When connecting the power cord, make sure that the

power plug is securely and completely inserted into the power

outlet.

● Do not use a power cord or AC adapter other than the ones

provided with this scanner.

● Do not take the scanner apart or modify it.

● Never try to take the AC adapter apart or modify it in any way, as

this is dangerous.

● Do not use flammable spray near the scanner.

● When cleaning the scanner, push the power button to turn it OFF

and disconnect the power cord from the power supply.

● Clean the scanner using a slightly dampened cloth which has been

well wrung out. Never use alcohol, benzene, paint thinner, or any

other flammable substances.

● If the scanner makes strange noises, or gives off smoke, heat, or

strange odors, or the scanner does not function or other

abnormalities occur when you use the machine, immediately push

the power button to turn it off, and disconnect the power plug from

the power outlet. Then, contact your local authorized Canon dealer

or service representative to have the unit serviced.

● Do not drop the scanner, or subject it to impact or strong shock.

Should the scanner ever become damaged, immediately push the

power button to turn it OFF, and disconnect the power plug from the

power outlet. Then, contact your local authorized Canon dealer or

service representative to have the unit serviced.

● Before moving the scanner, be sure to push the power button to turn

it OFF, and disconnect the power plug from the power outlet

CAUTION

● Do not install the scanner on a surface that is unstable or tilted, or

in an area subject to excessive vibrations, as this may cause the

scanner to fall, resulting in personal injury or damage to the

scanner.

● Never place small metal objects such as staples, paper clips, or

jewelry on the scanner. These items may fall into the scanner, and

cause a fire or electric shock. Should such objects ever fall inside

the scanner, immediately push the power button to turn it OFF, and

disconnect the power plug from the power outlet. Then, contact

your local authorized Canon dealer or service representative to

have the unit serviced.

● Do not install the scanner in a humid or dusty location. Doing so

might cause a fire or electric shock.

● Do not place objects on top of the scanner. Such objects may tip or

fall over, resulting in personal injury.

● Connect only to a power outlet of the rated voltage and power

supply frequency (120 V, 60 Hz or 220-240 V, 50/60 Hz depending

on your region). Doing so might cause a fire or electric shock.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 84 85

Comments to this Manuals

No comments

Canon DR-M160 User Manual Page 17

Comments to this Manuals

Related products and manuals for Scanner Transparancy Adapters Canon DR-M160