Canon VB-S800VE User Manual

Be sure to read this Operation Guidebefore using the network camera.Mobile Camera ViewerOperation GuideHow to Read This ManualThis manual contains ins

10Digital ZoomWhen a digital zoom range is available, the scroll bar for zooming will appear as follows.(i) Digital zoom rangeThe higher the zoom rati

11Note● You can also operate the camera with the PTZ control panel (P. 17).● When multiple tabs are open in the browser on an iPhone 6 Plus and it is

12●Drag to MoveIn the video display area, swipe in the direction you would like to change the camera angle. An arrow will appear and the camera angle

13● Double-tapping while viewing magnified video cancels magnified display.● will appear in the upper part of the video display area while viewing ma

14(3) Recording Start/Stop button (P. 16)Starts or stops recording.(4) PTZ Control button (P. 17)Displays the PTZ Control panel.(5) Obtain/Release Ctr

15(1) Preset buttonCamera settings, such as the camera angle or exposure, are changed to presets registered in advance.(2) Home Position buttonCamera

16(3) Recording Start/Stop buttonTap the button to start recording to the memory card. Tap again to stop recording.Note● When there is 20 MB or less a

17(4) PTZ Control buttonDisplays the PTZ Control panel.(i) Scroll Bar buttonDisplays/hides scroll bars in the video display area for controlling pan,

18(iii) Pan/Tilt control buttonTouch and hold to pan in that direction. Release your finger to stop.Touch and hold to tilt in that direction. Re

19(5) Obtain/Release Ctrl buttonTap to obtain control. Tap again to release control.NoteThe camera cannot be controlled by multiple users simultaneous

2Table of ContentsAbout Mobile Camera Viewer ...3Operating Environment ... 3Trademarks ...

20(7) Settings buttonAllows you to configure preset, incoming video size, and maximum frame rate settings.●Preset SettingsYou can register current cam

21[Register Preset]Select a preset number from [Register to], select [Registered Content], enter a preset name, and then tap [Register].NoteIf you sel

22[Delete Preset]Select a preset to delete and then tap [Delete].●Incoming Video SettingsSelect whether to receive digital PTZ cropped video and selec

23●Maximum Frame Rate SettingYou can set a maximum frame rate for video received from the camera.

24(8) Control for Admin buttonAllows you to configure focus, exposure, Clear IR Mode, day/night, and external device output settings.●Focus[Auto]Autom

25[Manual]Touch and hold the (Far) or (Near) buttons to adjust the focus.[Fixed at infinity]Fixes the focus at infinity, where camera focus adjust

26NoteThis cannot be configured when [Setting Page] > [Camera] > [Initial Setting] > [Exposure] is set to [Manual] or [Smart Shade] is set to

27[Day Mode]Color video can be viewed in the normal mode.[Night Mode]Video is shown in black and white, due to the disabling of the infrared filter.No

28(9) Snapshot buttonCaptures the image in the video display area, and saves the still image to the device.Snapshotpanel

29●Saving a Snapshot●Closing the Snapshot PanelTap .

3About Mobile Camera ViewerMobile Camera Viewer is a viewer for Canon network cameras that runs on mobile devices.Note that some functions may not be

30TroubleshootingCannot connect to camera● Check to make sure the user name and password are correct.● Check to make sure upper-case letters have not

BIE-7099-001 © CANON INC. 2016Viewer disconnects● The connection is severed when the camera creates a panoramic screen. Try connecting again after th

4Connecting to the CameraUse the device’s web browser to connect to the camera and launch Mobile Camera Viewer.1 Launch browser and enter the camera’s

5Note● The following authentication dialog box appears when the camera’s [Setting Page] > [Basic] > [Viewer] > [Default Page] is set to [Disp

6● If you open another window or tab to access the camera while an authenticated web page is displayed, the authentication information of the displaye

7Main Screen(1) Video Display AreaDisplays video received from the camera.(2) Information barDisplays information, warnings, and error messages.(3) Co

8NoteThe Mobile Camera Viewer’s video cannot rotate even when the camera’s [Setting Page] > [Basic] > [Viewer] > [Rotate Video Display] is se

9Operating the CameraCamera control privileges are required to operate the camera. You have camera control privileges when [Release Ctrl] is displayed