Canon Digital IXUS 860 IS User Manual Page 194

  • Download
  • Add to my manuals
  • Print
  • Page
    / 234
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 193
Troubleshooting
192
Too much light is shining
directly into the camera, or
is being reflected off the
subject.
z Change the shooting angle.
Flash is set to on. z Set the flash to (Flash off) (p. 71).
Image contains noise.
ISO speed is too high. z Higher ISO speeds and (High ISO
Auto) setting may increase image
noise. For higher image quality, use
as low an ISO speed as possible
(p. 104).
z In , , , , , and
modes, the ISO speed increases and
noise can appear.
White dots appear on the image.
Light from the flash has
reflected off dust particles or
insects in the air. This is
particularly noticeable when
shooting using the wide
angle.
z This is a phenomenon that occurs
with digital cameras and does not
constitute a malfunction.
Eyes appear red.
Light is reflected back from
the eyes when the flash is
used in dark areas.
z Turn [On] the Red-Eye setting in the
Rec. menu (p. 86). For this mode to
be effective, the subject must be
looking right at the red-eye reduction
lamp. Try asking them to look directly
at the lamp.
Even better results can be obtained
by increasing the lighting in indoor
settings or approaching closer to the
subject. The shutter will not activate
for approximately 1 second after the
red-eye reduction lamp fires in order
to improve the effect.
z You can correct red eyes in images
using the Red-Eye Correction
function (p. 151).
Page view 193
1 2 ... 189 190 191 192 193 194 195 196 197 198 199 ... 233 234

Comments to this Manuals

No comments