Canon MVX250I User Manual download pdf (Page 121)

121

Direct Printing

❍ If the message “BUSY” does not disappear, disconnect the cable from

camcorder and printer and reconnect the camcorder to the printer.

❍ Cancel Printing

Press the SET dial during printing. A confirmation dialog appears. Select [OK]

and press the SET dial.

- Canon Bubble Jet Printer: Printing stops even if it is incomplete and the

paper is fed through.

- Canon CP-Printer: A print in progress cannot be stopped. Printing stops

when the current print is finished and the remaining prints are cancelled.

❍ Printing Errors

If an error occurs during the printing process, an error message appears

( 140).

- Canon Bubble Jet Printer: Select [STOP] or [CONTINUE] and press the SET

dial. With most errors, printing resumes automatically after you correct the

error. Refer also to the printer manual for details.

- Canon CP-Printer: Select [STOP] or [RESUME] and press the SET dial. (The

[RESUME] setting may not appear with some error messages. In that case,

select [STOP].) Refer also to the printer manual for details.

- If the error still persists and printing does not restart, follow below

procedure:

1. Disconnect the cable.

2. Turn the POWER switch of the camcorder to OFF and back to PLAY (VCR).

3. Reconnect the cable.

❍ When you have finished printing:

1. Disconnect the cable from the camcorder and printer.

2. Turn off the camcorder.

1 2 ... 116 117 118 119 120 121 122 123 124 125 126 ... 158 159

No comments

Canon MVX250I User Manual Page 121