Canon MVX250I User Manual download pdf (Page 91)

Editing

Connecting to a Computer Using a DV (IEEE1394) Cable

You can transfer recordings to a computer equipped with a IEEE1394 (DV) terminal or

IEEE1394 capture board. Optional software is required for transferring recordings

from the tape to a computer. Refer to the instruction manual of the software.

Use the optional CV-150F (4 pin–4 pin) or CV-250F (4 pin–6 pin) DV Cable.

❍ Operation may not work correctly depending on the software and the

specifications/settings of your computer.

❍ If the computer freezes while you have connected the camcorder, disconnect

and reconnect the DV cable. If the problem persists, disconnect the interface

cable, turn off camcorder and computer, turn camcorder and computer back

on and reconnect them.

❍ Do not disconnect the DV cable, open the memory card cover, remove the

memory card, change the position of the POWER switch or turn off the

camcorder and computer while data is being transferred to the computer

(while the camcorder’s card access indicator is flashing). Doing so may damage

the memory card’s data.

❍ The image files on your memory card and the image files saved on the hard

disk drive of your computer are valuable, original data files. If you wish to use

image files on your computer, make copies of them first, and use the copied

file, retaining the original.

❍ We recommend powering the camcorder from a household power source

while it is connected to the computer.

❍ Refer also to the instruction manual of the computer.

❍ Users of Windows XP can use the supplied DV Network Software. For details,

refer to the DV Network Software Instruction Manual.

IEEE1394 (DV) terminal

DV Cable (optional)

6-pin

4-pin

1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 158 159

No comments

Canon MVX250I User Manual Page 91