Canon LX-MU500Z User Manual Page 18
- Page / 73
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
18 Before Installation
Do Not Touch the Lens with Bare Hands
Do not touch the lens with bare hands. Any smudges or fingerprints
on the lens may affect image quality.
Allow a 30 Min. Warm Up before Focus Adjustment, if Possible
Immediately after startup, the heat of the light source may prevent stable focus.
Install at a Sufficient Distance from Walls and Other Obstructions
If the air intake or exhaust vent is
blocked, heat will accumulate
inside the projector, possibly
resulting in a shortened projector
lifetime or a malfunction. Similarly,
do not install in narrow, enclosed
spaces with poor ventilation. Install
in a well-ventilated location.
Ensure a minimum clearance of 30
cm (1.0') above, 50 cm (1.6') on
both sides, and 50 cm (1.6') behind the projector, as shown below.
Also ensure a minimum clearance of 2 cm (0.8") below the
projector.
Be Careful of Condensation
If the temperature of the room rises suddenly, moisture in the air may condense on the
projector lens and mirror, causing the image to become blurred. Wait until the condensation
has evaporated for the image projected to return to normal.
At Altitudes above of 1,201 m (3,940') to 3,000 m (9,843'), Adjust
the Settings
Projector settings must be adjusted when using the projector at altitudes of 1,201 m (3,940') to
3,000 m (9,843'). Specifically, refer to instructions for "High Altitude Mode" (page 49) in the
"SYSTEM SETUP: Advanced menu" menu.
When Using Mounted on the Ceiling
When using the projector mounted on
the ceiling or installed in a high location,
clean around the air intake and exhaust
vents periodically. Dust that
accumulates in intake or exhaust vents
may impair ventilation, raising the
temperature inside and posing a risk of damage or fire. Use a
vacuum cleaner or similar means to remove dust from the intake
vent and exhaust vent.
Do not install the projector in a location that is damp or dusty, or
where there is a lot of oily smoke or steam. Oil can degrade the
plastic, which could result in a ceiling-mounted projector falling from
its mounting.
Caution
Caution
Air intake
vent
Exhaust
vent
Caution
- LX-MU500Z 1
- User’s Manual 1
- Table of Contents 2
- Safety instructions 3
- CAUTION ON HANGING FROM THE 3
- 4 Safety instructions 4
- AC Power Cord Requirement 5
- 6 Safety instructions 6
- Safety Symbols in this Manual 7
- Precautions for Use 8
- Installation and Use 9
- 10 Safety instructions 10
- Laser Light Source 11
- Remote Control Batteries 12
- Handling 13
- 14 Safety instructions 14
- For Safe Use 15
- Before Installation 17
- 18 Before Installation 18
- Air intake 18
- 19 Before Installation 19
- Copyright Notice 20
- Ensure Network Security 20
- About Trademarks 20
- Third party software 21
- Third party software support 21
- Introduction 22
- 23 Introduction 23
- Projector exterior view 24
- Controls and functions 25
- 26 Introduction 26
- Positioning your projector 27
- Layout of the projector 28
- Adjusting the projected image 30
- Connection 31
- 32 Connection 32
- 33 Connection 33
- Operation 34
- Using the menus 35
- Switching input signal 35
- Shutting down the projector 36
- Watching 3D content 37
- 38 Watching 3D content 38
- Menu operation 39
- Main menu Sub-menu Options 40
- DISPLAY menu 42
- 43 Menu operation 43
- 44 Menu operation 44
- PICTURE menu 45
- Function Description 46
- INPUT menu 47
- SYSTEM SETUP: Basic menu 47
- SYSTEM SETUP: Advanced menu 49
- 50 Menu operation 50
- INFORMATION menu 51
- About PJLink 54
- PJLink Commands 55
- Glossary 56
- Maintenance 57
- Light source information 58
- Indicators 59
- Troubleshooting 60
- 61 Troubleshooting 61
- Specifications 62
- 63 Specifications 63
- Dimensions 64
- Timing chart 64
- 65 Specifications 65
- 66 Specifications 66
- • Supported Video timings 67
- 68 Specifications 68
- Projector Control 69
- 70 Projector Control 70
- 71 Projector Control 71
- Control Response 72
Related products and manuals for Data projectors Canon LX-MU500Z
Data projectors Canon LV-8320 User Manual
(62 pages)
(62 pages)
Data projectors Canon LV-HD420 User Manual
(87 pages)
(87 pages)
Data projectors Canon LV-7290 User Manual
(60 pages)
(60 pages)
Data projectors Canon LX-MU500 User Manual
(83 pages)
Data projectors Canon LX-MU600Z User Manual
(117 pages)
(117 pages)
Data projectors Canon XEED WUX6010 User Manual
(202 pages)
(202 pages)
Data projectors Canon LV-WX310ST User Manual
(80 pages)
(80 pages)
Data projectors Canon XEED WUX6000 User Manual
(236 pages)
(236 pages)
Data projectors Canon LV-7292A User Manual
(60 pages)
(60 pages)
Data projectors Canon LV-7590 User Manual
(90 pages)
(90 pages)
Data projectors Canon LV-X310ST User Manual
(79 pages)
Data projectors Canon LV-HD420 User Manual
(87 pages)
(87 pages)
Data projectors Canon XEED WUX500 User Manual
(198 pages)
(198 pages)
Data projectors Canon XEED WUX450 User Manual
(319 pages)
(319 pages)
Data projectors Canon XEED WUX6500 User Manual
(210 pages)
(210 pages)
Data projectors Canon XEED WUX5800 User Manual
(235 pages)
(235 pages)
Data projectors Canon XEED WUX6000 User Manual
(244 pages)
(244 pages)
© 2020, manymanuals.com. All rights reserved. | 0.300 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals