Canon LX-MU500Z User Manual download pdf (Page 54)

54 Controlling the projector remotely

• Info page

The info page displays the information and status of this projector.

i. The information you entered in the Tools page will display here and these columns are

empty when you use e-Control

for the first time.

ii. When the projector is in abnormal conditions, the following information will display.

iii. Press this button to go back to the remote network operation page.

Controlling the projector using PJLink application

This projector supports standard protocol PJLink for projector control and you can control and

monitor projector's operations using the same application among projectors of different models

and different manufacturers.

About PJLink

• To use PJLink function, the PJLink application software is required.

• For the specifications of PJLink, access to the Web site of Japan Business Machine and

Information System Industries Association (JBMIA). (http://pjlink.jbmia.or.jp/english)

When the projector is in normal conditions or in any abnormal conditions other than the ones

mentioned below, the Error Status column will be "0:No Error".

Error Status Description

3: Light source fail The light source fails to ignite or turns off during operation.

3: Over Temp The projector temperature is too high or cannot be

detected.

3: Fan Lock The fan rotation speed cannot be set or detected.

3: Over Light Source

Usage Time

The light source is still in use after the light source warning

messages display.

(3 = Error)

iii

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 72 73

No comments

Canon LX-MU500Z User Manual Page 54