Canon LX-MU500Z User Manual Page 55

  • Download
  • Add to my manuals
  • Print
  • Page
    / 73
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 54
55 Controlling the projector remotely through a
• This projector is fully compliant to the specifications of JBMIA PJLink Class 1. It supports all
the commands defined by PJLink Class 1, and the compliance has been verified with the
PJLink standard specifications Version 1.4.
Utilizing the password function
To prevent unauthorized connection to the projector via PJLink application, the projector
includes an option for setting up password security. To set the password, see "LAN Settings"
on page 51.
PJLink Commands
This projector supports standard protocol PJLink for projector control. Supported commands
are as below.
Command Control details Notes
POWR Power control
0 = Power off
1 = Power on
POWR?
Inquiry about the power
state
0 = Standby
1 = Power on
2 = Cooling down
3 = Warming up
INPT Input switching 11 = COMPUTER1
21 = VIDEO
22 = S-VIDEO
31 = HDMI1/MHL
32 = HDMI2
33 = HDBaseT
INPT?
Inquiry about input
switching
AVMT Mute control 10 = BLANK disable
11 = BLANK enable
20 = Audio mute disable
21 = Audio mute enable
30 = BLANK and audio mute disable
31 = BLANK and audio mute enable
AVMT?
Inquiry about the mute
state
ERST?
Inquiry about the error
state
1st byte: Fan error, 0 or 2
2nd byte: Light source error, 0 or 2
3rd byte: Temperature error, 0 or 2
4th byte: Always 0
5th byte: Always 0
6th byte: Other errors, 0 or 2
* 0 or 2 mean as follows:
0 = No error detected, 2 = Error
LAMP?
Inquiry about the light
source state
1st value (1 to 4 digits): Cumulative light source
operating time (This item shows a lamp operating
time (hour) calculated based on that Light Source
Mode is Economic.)
2nd value: 0 = Light source off, 1 = Light source on
INST?
Inquiry about the available
inputs
The following value is returned.
"11 12 21 22 31"
NAME?
Inquiry about the projector
name
The command responds with the projector name
specified in the Tools page.
Page view 54
1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 72 73

Comments to this Manuals

No comments