Canon Pixma MP560 Series Technical Information download pdf (Page 101)

Solution 2: Check the print quality setting

Solution: Check the quality setting. Use a higher quality setting to increase the

amount of ink used for printing.

For more information, see:

•

Change the print speed or quality

•

Maximum dpi

Cause: The print quality setting was set to low.

If this did not solve the issue, try the next solution.

Solution 3: Rotate the image

Solution: If the problem persists, use the software you installed with the product or

another software application to rotate your image 180 degrees so that the light blue,

gray, or brown hues in your image do not print at the bottom of the page.

Cause: The photo image had light blue, gray, or brown hues that print near the

bottom of the page.

Printouts have horizontal streaks or lines

Try the following solutions if your printout has a lines, streaks, or marks on it that run side-

to-side across the width of the page.

•

Solution 1: Make sure the paper is loaded correctly

•

Solution 2: Check the print quality setting

•

Solution 3: If the print cartridge was dropped, wait for it to recover

•

Solution 4: Clean the print cartridge nozzles

•

Solution 5: Clean the print cartridges

Solution 1: Make sure the paper is loaded correctly

Solution: Make sure the paper is loaded correctly.

For more information, see:

•

Print documents

•

Print photos

Cause: The paper was not feeding properly or was not loaded correctly.

If this did not solve the issue, try the next solution.

Chapter 11

98 Troubleshooting

Troubleshooting

1 2 ... 96 97 98 99 100 101 102 103 104 105 106 ... 120 121

No comments

Canon Pixma MP560 Series Technical Information Page 101