Canon imagePROGRAF iPF780 Basic Guide download pdf (Page 66)

Caution

• The Stand must be assembled by at least two people on a flat surface. Attempting assembly by yourself

poses a risk of injury or bending the Stand.

• When assembling the Stand, lock all four of the casters. Attempting to move the stand when the casters

are not locked poses a risk of injury or damage to the location site.

•

Before moving the assembled stand, lift the

support rod to the position shown (a) and un-

lock all four casters. Moving the stand with the

support rod lowered or the casters locked may

cause injury or damage the area of installation

or basket cloth.

Install the printer

Mount the printer on the assembled Stand and

tighten the screws firmly.

Caution

• Moving the printer requires at least three people. Be careful to avoid back strain and other injuries.

•

When moving the printer, firmly grasp the Car-

rying Handles. The printer may be unsteady if

you hold it at other positions, which poses a

risk of injury from dropping the printer.

•

When placing the printer on the Stand, lock all four of the casters of the Stand. Attempting to place the

printer on the Stand while the casters are not locked poses a risk of injury.

Reinstalling the Printer

iPF780 Series

Basic Guide

Printer Relocation Preparing to Transfer the Printer

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 132 133

No comments

Canon imagePROGRAF iPF780 Basic Guide Page 66