Canon PIXMA MX925 User Manual download pdf (Page 111)

Printing the Nozzle Check Pattern

Print the nozzle check pattern to determine whether the ink ejects properly from the print head nozzle.

Note

If the remaining ink level is low, the nozzle check pattern will not be printed correctly. Replace the ink

tank whose ink is low.

Replacing an Ink Tank

You need to prepare: a sheet of A4 or Letter-sized plain paper

Make sure that the power is turned on.

Make sure that one or more sheets of A4 or Letter-sized plain paper are loaded in

the cassette (lower).

3. Open the paper output tray.

(1) Holding both sides of the paper output tray, gently open it.

The output tray extension will open automatically when the paper output tray is opened.

(2) Extend the paper output support.

Important

If the inner cover is open, close it.

Print the nozzle check pattern.

(1) Press the MENU button.

(2) Select Setup, then press the OK button.

LCD and Operation Panel

The setup menu screen will appear.

(3) Select Maintenance, then press the OK button.

The Maintenance screen will appear.

(4) Select Print nozzle check pattern, then press the OK button.

The confirmation screen will appear.

(5) Select Yes, then press the OK button.

The nozzle check pattern will be printed and two pattern confirmation screens will appear on the

LCD.

1 2 ... 106 107 108 109 110 111 112 113 114 115 116 ... 225 226

No comments

Canon PIXMA MX925 User Manual Page 111