Canon imagePROGRAF iPF6400S User Manual Page 143

  • Download
  • Add to my manuals
  • Print
  • Page
    / 164
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 142
iPF6400S Basic Guide
143
Error Message Messages regarding paper
End of paper feed.
Cause Corrective Action
Although an attempt was made to advance the paper manually, it
reached the limit position that can be advanced.
Canceling manual advancing.
(See "Feeding Roll Paper Manually.")
User's
Guide
Borderless printng not possible.
Cause Corrective Action
The print job received specifies a
type or width of paper that is not
compatible with borderless
printing.
Follow these steps to change the settings of the print job to enable borderless
printing.
1. Press
or
to select
Stop Printing
, and then press the
OK
button.
2. Make sure the correct printer driver for the printer is selected and try printing
again.
For information on types of paper compatible with borderless printing, refer to the
Paper Reference Guide.
(See "Paper Reference Guide.")
Press
or
to select
Print With Border
, and then press the
OK
button to
continue printing. The document will be printed with a border.
The loaded paper is a size not
compatible with borderless
printing.
Press
or
to select
Stop Printing
, and then press the
OK
button.
Replace the paper with paper compatible for borderless printing as follows.
1. Press
or
to select
Change Paper
, and then press the
OK
button.
(See "Removing the Roll from the Printer.")
P.17
(See "Removing Rolls From the Roll Holder.")
User's Guide
2. Replace the paper with paper compatible for borderless printing.
(See "Loading Rolls on the Roll Holder.")
P.12
(See "Loading Rolls in the Printer.")
P.14
The printer now starts printing the print job.
For information on types of paper compatible with borderless printing, refer to the
Paper Reference Guide.
(See "Paper Reference Guide.")
Press
or
to select
Print With Border
, and then press the
OK
button to
continue printing. The document will be printed with a border.
Because paper expands or
contracts depending on the
environment of use, it may
become narrower or wider than
the supported width for borderless
printing.
Use each type of paper only where the recommended environmental conditions are
met. For details on environmental conditions for various paper, see the Paper
Reference Guide.
(See "Paper Reference Guide.")
The paper is loaded askew.
Press
or
to select
Change Paper
and straighten the paper so that the edges
are between the ink grooves for borderless printing.
Insert the roll firmly until it touches the flange of the Roll Holder.
For borderless printing on A1 (594 mm or 23.4 in) or A2 (420 mm or 16.5 in) rolls,
attach the included Spacer for Borderless Printing to the Roll Holder.
(See "Loading Rolls on the Roll Holder.")
P.12
Press
or
to select
Print With Border
, and then press the
OK
button to
continue printing. The document will be printed with a border.
Page view 142
1 2 ... 138 139 140 141 142 143 144 145 146 147 148 ... 163 164

Comments to this Manuals

No comments