Canon Powershot Pro1 User Manual download pdf (Page 29)

Preparing the Camera, Basic Functions

Attaching the Lens Hood

When shooting backlit scenes without a flash with the lens set to a

wide angle, you should attach the lens hood to prevent light outside

the scene from coming into the lens. Be sure to turn off the camera

before you attach the lens hood.

Attaching the Filter Adapter

If you wish to attach a commercially available filter (58 mm

diameter), attach the filter adapter in advance. Be sure to turn off the

camera before you attach the filter adapter.

Attach the lens hood so that

its

meets the lens’

then turn the lens hood

clockwise until the lens’

meets .

z If you use the built-in flash when the lens hood is attached, a

portion of the image appears to be blocked by the lens hood and

appears dark.

Attach the filter adapter so

that its

meets the lens’

then turn the filter adapter

clockwise until the lens’

meets .

z The filter adapter is exclusively for use with a filter. If you wish to

attach Close-up Lens 500D (sold separately) to the camera, use

Conversion Lens Adapter LA-DC58C (sold separately) (p. 177).

z Attaching more than one filter at the same time may cause dark

shadows on the image depending on the zoom position.

Lens Hood

Filter Adapter

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 209 210

No comments

Canon Powershot Pro1 User Manual Page 29