Canon EOS-1D X User Manual download pdf (Page 313)

100

101

313

wPrinting

You can crop the image and print only

the trimmed portion as if the image was

recomposed.

Set the trimming right before printing.

If you set the trimming and then set the

print settings, you may have to set the

trimming again before printing.

1 On the print setting screen, select [Trimming].

2 Set the trimming frame size, position, and aspect ratio.

The image area within the trimming frame will be printed. The

trimming frame’s aspect ratio can be changed with [

Paper settings

Changing the trimming frame size

Turn the <6> dial to change the trimming frame size. The

smaller the trimming frame, the larger the image magnification will

be for printing.

Moving the trimming frame

Use <

> to move the frame over the image vertically or horizontally.

Move the trimming frame so that it covers the desired image area.

Rotating the frame

Pressing the <B> button will toggle the trimming frame

between the vertical and horizontal orientations. This enables you

to create a vertically oriented print from a horizontal image.

Image tilt correction

By turning the <5> dial, you can adjust the image tilt angle up to

±10 degrees in 0.5-degree increments. When you adjust the

image tilt, the <O> icon on the screen will turn blue.

3 Press <0> to exit the trimming.

X The print setting screen will reappear.

You can check the trimmed image area on the upper left of the

print setting screen.

Trimming the Image

Tilt correction

1 2 ... 308 309 310 311 312 313 314 315 316 317 318 ... 431 432

Comments to this Manuals

No comments

Canon EOS-1D X User Manual Page 313

Comments to this Manuals

Related products and manuals for Camcorders Canon EOS-1D X