Canon EOS-1D X User Manual download pdf (Page 351)

351

85: Custom Controls

During metering, you can select an AF point directly with the <5> dial

or <9> without pressing the <S> button. With the <5

> dial, you can

select a left or right AF point, or cycle through the zones if using Zone AF.

*4: If you use <9> and press the <B> button in step 3 on page 343, you can press

<9> straight down to select [Switch to center AF point] or [Switch to registered

AF point].

You can select the AF point directly with the <

> dial without first

pressing the <

> button. While metering is active, turning the <

> dial

will select a horizontal AF point, or cycle through the zones if using Zone

AF. The functions of the <

> and <

> buttons will be switched

between them. By holding down the <

> button and turning the <

dial, you can set the exposure compensation or aperture.

When you press the shutter button halfway, only exposure metering is performed.

When you press the button assigned to this function, you can lock the

exposure (AE lock) during the metering. This is convenient when you

want to focus and meter the shot separately or when you want to take

multiple shots at the same exposure setting.

The exposure will be locked (AE lock) while you press the shutter button.

When you press the button assigned to this function, you can lock the exposure

(AE lock). The AE lock will be maintained until you press the button again. This

is convenient when you want to focus and meter the shot separately or when

you want to take multiple shots at the same exposure setting.

: AF point direct selection

: Select AF point, O z S ( during metering)

: Metering start

: AE lock

: AE lock (while button pressed)

: AE lock (hold)

If you assign [AE lock (while button pressed)] to the shutter button, any

buttons assigned to [AE lock] or [AE lock (hold)] will also work as [AE lock

(while button pressed)].

1 2 ... 346 347 348 349 350 351 352 353 354 355 356 ... 431 432

No comments

Canon EOS-1D X User Manual Page 351