Canon VB-H630D Owner's Manual download pdf (Page 149)

Performing Operations and Settings in the Admin Viewer

149

Admin Viewer/VB Viewer

[Registered] will appear next to the mode, [Day Mode]

or [Night Mode], picked in step 1.

[Clear the registered focus position?] will appear when

selecting (5) or (8), even if only one focus position has

been registered for either [Day Mode] or [Night Mode].

When switching to (5) or (8), and then back to [Move to

registered focus position] mode, selecting [No] will

preserve the registered focus position. Selecting [Yes] will

clear the registered focus position.

Note

Refer to the following for focus ranges when Day/Night is

enabled.

Notes on p. 55

Notes on p. 38

 Selecting the External Device Output

You can control external device output and display the

current output status using an icon. Output can be

activated and deactivated by clicking this icon.

Example:

Output 1: inactive

Output 2: active

 Registering Custom Settings

By registering settings for camera position, exposure,

white balance, etc. beforehand, you can load settings

using manual or automatic control.

In custom settings, the setting values for the following

items in the Control for Admin menu can be saved.

[Smart Shade Control], [Focus], [Exposure], [White

Balance], [Image Quality Adjustment], [Day/Night]

[Pan/Tilt/Zoom]

Click [Register] after completing the above settings to

(1) Custom setting button

Select the numbered button with the registered

custom settings to load the settings.

(2) [Register Custom Settings]

The [Register Custom Settings] panel is displayed.

(3) [Register to]

Select the number for the custom setting you want to

(4) [Include Current PTZ Position] checkbox

Select the checkbox to register the current pan, tilt,

and zoom settings.

(5) [Register]

setting number selected in [Register to].

(6) [Auto Control Settings]

Displays the [Auto Control Settings] panel.

(7) [Verify registered contents of custom settings]

Displays the settings registered for the custom setting

number selected in [Register to].

Select (2) [Day Mode] or (3) [Night Mode] in [Day/

Night] (p. 148).

Under the lighting conditions selected in step 1, adjust

the focus position as required while watching the

video.

Click [Register focus position].

Select the remaining mode in step 1, and repeat steps

2-3.

Important

• If the viewer is exited in [Day Mode] or [Night Mode], auto

day/night stays disabled even if [Auto] is set in the setting

page. To set auto day/night to enable, be sure to exit the

viewer after setting [Auto].

• While making settings with the [Day/Night Mode Focus

Settings] panel, it is not possible to make settings using

Admin Tools on another computer.

• If [Use One-shot AF] is activated due to switching between

Day/Night Mode, the camera may not be able to focus on a

target subject using One-shot AF if another subject passes in

front of the target at that time.

• If Night Mode will be used under infrared lighting, turn on the

lighting before switching to Night Mode.

• Even if you use [Day/Night Mode Focus Settings], focus may

not be maintained in Night Mode if the light source changes

(ex. infrared lighting to sunlight).

(1)

(2)

(3)

(4)

(5)

(6)

(7)

1 2 ... 144 145 146 147 148 149 150 151 152 153 154 ... 185 186

Comments to this Manuals

No comments

Canon VB-H630D Owner's Manual Page 149

Comments to this Manuals

Related products and manuals for Document cameras Canon VB-H630D