Canon VB-H630D Owner's Manual Page 91

  • Download
  • Add to my manuals
  • Print
  • Page
    / 186
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 90
Privacy Mask Setting Tool
91
6
Admin Tools
(1) Privacy Mask Area
Enabled privacy mask areas are shown filled with
color. Disabled privacy mask areas are just shown
in a frame.
(2) View Restriction Area
This is the area set with the View Restriction Setting
Tool.
(3) Privacy Mask Area
Privacy masks for which the [Enable privacy mask]
checkbox is selected are shown filled with color.
Privacy masks that are not selected are shown in a
hatched frame.
(4) Maximum Wide-angle Area
This is the visible area when the camera is at
maximum wide angle. This area is only shown
when a privacy mask area (3) is being dragged.
(1) (2)(3) (4)
(1) (3)
Important
The privacy mask areas are also part of the intelligent
function detection area. Subject movement may be seen.
Privacy masks are applied to all images transmitted from the
camera (live video, uploaded images, recorded video, video
recorded to an memory card).
Check privacy mask settings again if the [Video] > [Video
Size Set] settings on the Setting page have been changed.
The privacy mask function is not available in the following
situations:
While the camera is starting up after being turned on
Camera video in the
Camera Angle Setting Tool
While a panorama image is being created
The position of the privacy mask will need to be set again if
the image flip setting is changed.
You can set privacy masks for optical zoom areas only.
Privacy mask areas cannot be set in digital zoom areas.
Privacy masks may deviate slightly from the specified
position depending on the zoom position.
Set the privacy mask area to a somewhat larger size than the
area you want to hide. Also, be sure to confirm that after
setting a privacy mask, the area you want to hide does not
become visible when the camera direction is altered by pan,
tilt, or zoom operations.
If the privacy mask settings were changed after a panorama
image was saved using the Panorama Creation Tool, the
panorama image must be recreated using the Panorama
Creation Tool.
Reconfigure all privacy mask positions and sizes when
reconfiguring privacy mask settings after the image stabilizer
setting was changed.
Page view 90
1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 185 186

Comments to this Manuals

No comments