Canon PIXMA TS3150 User Manual download pdf (Page 221)

Printing Does Not Start

Check1

Make sure printer is securely plugged in and press ON button to turn it on.

The ON lamp flashes while the printer is initializing. Wait until the ON lamp stops flashing and remains lit.

Note

•

If you are printing large data such as photos or other graphics, printing may take longer to start. The ON

lamp flashes while the computer is processing data and sending it to the printer. Wait until printing starts.

Check2

Make sure printer is properly connected to computer.

When the printer is connected to your computer with a USB cable, check the following:

•

If you are using a relay device such as a USB hub, disconnect it, connect the printer directly to the

computer, and retry the printing. If printing starts normally, there is a problem with the relay device. Contact

the vendor of the relay device.

•

There could also be a problem with the USB cable. Replace the USB cable and retry the printing.

If you use the printer over a LAN, make sure the printer is correctly set up for network use.

Note

•

IJ Network Device Setup Utility allows you to diagnose and repair the network status. Download it from the

web page.

For Windows

For Mac OS

Check3

Make sure paper settings match information set for rear tray.

If the paper settings do not match the information set for the rear tray, an error code appears on the LCD and

message appears on the computer.

An Error Occurs

Check4

If printing from a computer, delete unnecessary print jobs.

• For Windows:

Deleting the Undesired Print Job

• For Mac OS:

Deleting the Undesired Print Job

Check5

Is your printer's printer driver is selected when printing?

The printer will not print properly if you are using a printer driver for a different printer.

221

1 2 ... 216 217 218 219 220 221 222 223 224 225 226 ... 292 293

No comments

Canon PIXMA TS3150 User Manual Page 221