Canon imagePROGRAF iPF825 User Manual download pdf (Page 37)

There may be ink around the nozzles of the Printhead you remove. Handle the Printhead carefully during

replacement. The ink may stain clothing.

•

Do not open the Printhead pouch until immediately before installation. After removing the Printhead from the pouch,

install it right away. If the Printhead is left after the pouch is opened, the nozzles may dry out, which may affect

printing quality.

•

Prepare a new Ink Tank when ink levels are low.•

When replacing the Printhead immediately after printing, wait a few minutes before replacing it. The metal parts of

the Printhead become hot during printing, and there is a risk of burns from touching these parts.

•

Your hands may become dirty during Printhead replacement. Use the gloves provided with the new Printhead for

replacement.

•

When to replace the printhead

Replace the Printhead in the following situations.

If the printing quality does not improve even after one or two cycles of Head Cleaning B from the printer

•

If the Display Screen indicates Open top cover and replace the printhead. •

If your Canon dealer has advised you to replace the Printhead •

Use Printhead PF-03 .

Take the following precautions when handling the Printhead .

Compatible printheads

Precautions when handling the printhead

Replacing the Printhead

Replace the Printhead as follows.

If the roll is not ejected because of the cutting method

selected, cut it manually and remove it. (→"Cutting Roll

Paper After Printing," User Manual)

Clean inside the Top Cover . (→

, If Paper is Soiled)

Access the menu for printhead replacement

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 47 48

No comments

Canon imagePROGRAF iPF825 User Manual Page 37