Canon imagePROGRAF iPF825 User Manual download pdf (Page 40)

Replacing the Printhead

When handling the Printhead , always hold it by the

grips (a). Never touch the nozzles (b) or metal contacts

(c). This may damage the Printhead and affect printing

quality.

•

If you need to put a Printhead somewhere temporarily before installation, do not keep the nozzles and

metal contacts facing down. If the nozzles or metal contacts are damaged, it may affect the printing

quality.

•

The inside surfaces of Safety Cap 1 (a) and Safety Cap 2 (b) are coated with ink to protect the nozzles.

Be careful not to touch these surfaces when removing the caps.

•

Never touch the ink supply section (d). This may cause printing problems.•

The Printhead contains ink to protect the nozzles. We recommend removing Safety Cap 2 (b) as you

hold it over the Printhead package or safely out of the way to avoid spilling ink and staining your clothes

or the surrounding area. If ink accidentally spills, wipe off the ink with a dry cloth.

•

Do not reattach the Safety Cap or protective material. Dispose of these materials in accordance with

local regulations.

•

Holding the new Printhead by the grips (a), remove it from

the case.

While ﬁ rmly holding the Printhead you have removed, use

your other hand to remove the orange Safety Cap 1 (a).

Squeeze the grips (c) of Safety Cap 2 (b) and pull it down

to remove it.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 46 47 48

No comments

Canon imagePROGRAF iPF825 User Manual Page 40