Be sure to read this Operation Guidebefore using the network camera.Mobile Camera ViewerOperation GuideHow to Read This ManualThis manual contains ins
10Main Screen Control Panel(1) Preset button (P. 12)Camera settings, such as the camera angle or exposure, are changed to presets registered in advanc
11(5) Control/Release button (P. 15)Enables or disables camera control privileges.(6) Disconnect button (P. 16)Disconnects from the camera.(7) Setting
12(1) Preset buttonCamera settings, such as the camera angle or exposure, are changed to presets registered in advance.(2) Home Position buttonCamera
13(3) Recording Started/Stopped buttonTap the button to start recording to the memory card. Tap again to stop recording.Note● When there is 20 MB or l
14(4) PTZ Control buttonDisplays the PTZ Control panel.(i) Zoom control buttonsTouch and hold to zoom in (telephoto), and touch and hold to zoom o
15Note● Only the Zoom control buttons and Home Position button can be used when a power zoom lens is attached.● The Zoom control buttons cannot be use
16NoteThe camera cannot be controlled by multiple users simultaneously. Only the user with control privileges can control the camera.(6) Disconnect bu
17[Register Preset]Select a preset number from [Register to], enter a preset name, and then tap [Register].
18NoteIf you select [Home Position] in [Register to], you can set the home position.[Delete Preset]Select a preset to delete and then tap [Delete].●In
19●Maximum Frame Rate SettingsYou can set a maximum frame rate for video received from the camera.
2Table of ContentsAbout Mobile Camera Viewer ...3Operating Environment ... 3Trademarks ...
20(8) Control for Admin buttonAllows you to configure focus, exposure, infrared, external device output, and ND filter settings.
21●FocusTapping the button automatically adjusts the focus once, and then switches to the manual mode.You can touch and hold the (Far) and (Near
22NoteThe items that can be controlled vary depending on the camera’s [Settings Page] > [Camera] > [Camera Mode] setting.[AE Shift]Adjusts the b
23[Iris]Specify the iris (aperture).Moving the slider to the right closes the iris and darkens the image. Moving the slider to the left opens the iris
24●ND FilterYou can select whether to use the ND filter.Using the ND filter allows you to open up the aperture to obtain a shallower depth of field ev
25(9) Snapshot buttonCaptures the image in the video display area, and saves the still image to the device.Snapshotpanel
26●Saving a Snapshot●Closing the Snapshot PanelTap .
27TroubleshootingCannot connect to camera● Check to make sure the user name and password are correct.● Check to make sure upper-case letters have not
28● Reboot the device and connect.Cannot register settings● Only the admin user can register settings.● Relaunch the web browser, reconnect to the cam
BIE-7224-000 © CANON INC. 2017For information on lenses, please refer to “Setup Guide”.
3About Mobile Camera ViewerMobile Camera Viewer is a viewer for Canon network cameras that runs on mobile devices.Note that some functions may not be
4Connecting to the CameraUse the device’s web browser to connect to the camera and launch Mobile Camera Viewer.1 Launch browser and enter the camera’s
5Note● The following authentication dialog box appears when the camera’s [Settings Page] > [Basic] > [Viewer] > [Default Page] is set to [Dis
6● If you open another window or tab to access the camera while an authenticated web page is displayed, the authentication information of the displaye
7Main Screen(1) Video Display AreaDisplays video received from the camera.(2) Information barDisplays information, warnings, and error messages.(1)(2)
8(3) Control panel (P. 10)Displays buttons for controlling the camera.
9Operating the CameraCamera control privileges are required to operate the camera. You have camera control privileges when [Release] is displayed. Whe
Comments to this Manuals