Canon EOS 6D User Manual Page 283

  • Download
  • Add to my manuals
  • Print
  • Page
    / 402
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 282
283
Dust that could not be removed by the automatic sensor cleaning can
be removed manually with a blower, etc. Before cleaning the sensor,
detach the lens from the camera.
The surface of the image sensor is extremely delicate. If the
sensor needs to be cleaned directly, having it done by a Canon
Service Center is recommended.
1
Select [Sensor cleaning].
Under the [54] tab, select [Sensor
cleaning], then press <0>.
2
Select [Clean manually].
Select [Clean manually], then press
<0>.
3
Select [OK].
Select [OK], then press <0>.
In a moment, the reflex mirror will
lockup and the shutter will open.
CLn” will blink on the LCD panel.
4
Clean the sensor.
5
End the cleaning.
Set the power switch to <2>.
3 Manual Sensor CleaningN
If you use a battery, make sure it is fully charged. If the battery grip with size-
AA/LR6 batteries is attached, manual sensor cleaning will not be possible.
For the power source, using the DC Coupler DR-E6 (sold separately) and
AC Adapter AC-E6N (sold separately) is recommended.
Page view 282
1 2 ... 278 279 280 281 282 283 284 285 286 287 288 ... 401 402

Comments to this Manuals

No comments