Canon EOS 6D User Manual Page 287

  • Download
  • Add to my manuals
  • Print
  • Page
    / 402
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 286
287
Preparing to Print
6
Play back the image.
Press the <x> button.
The image will appear, and the <w>
icon will appear on the upper left to
indicate that the camera is connected
to a printer.
wPictBridge
Movies cannot be printed.
The camera cannot be used with printers compatible only with CP Direct
or Bubble Jet Direct.
Do not use any interface cable other than the one provided.
If there is a long beeping sound in step 5, it indicates a problem with the
printer. Resolve the problem displayed in the error message (p.294).
Printing is not possible in the following cases: The shooting mode is set
to <F> or <G> in the <8> mode, Multi Shot Noise Reduction is set,
or HDR mode is set.
Under the [53] tab, if [Wi-Fi] is set to [Enable], direct printing is not
possible. Set [Wi-Fi] to [Disable], then connect the interface cable.
You can also print RAW images taken with this camera.
If you use a battery pack to power the camera, make sure it is fully
charged. With a fully-charged battery pack, you can print for approx. 5 hr.
30 min.
Before disconnecting the cable, first turn off the camera and printer. Hold
the plug (not the cord) to pull out the cable.
For direct printing, using the DC Coupler DR-E6 (sold separately) and
AC Adapter AC-E6N (sold separately) to power the camera is
recommended.
Page view 286
1 2 ... 282 283 284 285 286 287 288 289 290 291 292 ... 401 402

Comments to this Manuals

No comments