Canon DC330 User Manual download pdf (Page 18)

18 • Preparations

1 Disconnect the compact power

adapter from the camcorder.

2 Unplug the power cord from the

power outlet and the compact

power adapter.

Press to release the battery

pack. Slide the battery pack down

and then pull it out.

IMPORTANT

• Turn off the camcorder before

connecting or disconnecting the

compact power adapter. After you turn

the switch to , important file

allocation data is updated on the disc.

Be sure to wait until the PLAY and

CAMERA mode indicators are

completely off.

• You may hear some noise from the

compact power adapter during use. This

is not a malfunction.

• We recommend charging the battery

pack in temperatures between 10 °C and

30 °C. Outside the temperature range of

0 °C to 40 °C, the charging will not start.

• Do not connect to the camcorder’s DC

IN terminal or to the compact power

adapter any electrical equipment that is

not expressly recommended for use with

this camcorder.

• To prevent equipment breakdowns and

excessive heating, do not connect the

supplied compact power adapter to

voltage converters for overseas travels or

special power sources such as those on

aircraft and ships, DC-AC inverters, etc.

NOTES

• The CHARGE indicator also serves as a

rough estimate of the charge status.

Continuously on: Battery pack fully

charged.

Two quick flashes at 1-second intervals:

Battery pack at least 50% charged. If the

indicator flashes quickly but not exactly

in this pattern, refer to Troubleshooting

(77).

One flash at 1-second intervals: Battery

pack less than 50% charged.

• We recommend that you prepare battery

packs to last 2 to 3 times longer than you

think you might need.

Preparing the Wireless Controller and

Accessories

Using the Wireless Controller

First, insert the supplied lithium button

battery CR2025 into the wireless

controller.

1 Press the tab in the direction of the

arrow and pull out the battery

holder.

2 Place the lithium button battery

with the + side facing up.

3 Insert the battery holder.

ONCE THE BATTERY PACK IS FULLY CHARGED

T

O REMOVE THE BATTERY PACK

BATT.

Tab

D126_NTSC_PAL_E.book Page 18 Tuesday, January 15, 2008 12:35 PM

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 98 99

Comments to this Manuals

No comments