Canon DC330 User Manual download pdf (Page 82)

82 • Additional Information

REACHED THE MAXIMUM NUMBER OF

SCENES

- The maximum number of scenes has

been reached. Delete some recordings

(DVD-RW in VR mode) to free some

space ( 35) or replace the disc.

RECOVERING DATA

PLEASE WAIT…

- Data on the disc is being recovered.

Wait until this message disappears

before resuming use.

TASK IN PROGRESS DO NOT

DISCONNECT THE POWER SOURCE

- The camcorder is updating important

file allocation data on the disc. Do not

disconnect the compact power adapter

or remove the battery pack.

• TEMPERATURE TOO HIGH CANNOT

RECORD

• TEMPERATURE TOO HIGH CANNOT

REMOVE DISC

- The camcorder has exceeded its

operational temperature. Disconnect

the compact power adapter and

remove the battery and let the

camcorder cool down before resuming

use.

TOO MANY STILL IMAGES

DISCONNECT USB CABLE

Disconnect the USB cable and decrease

the number of still images on the memory

card to less than 1,800. If a dialog

appeared on the computer screen, close

it and then restore the connection.

TRANSFER ORDER ERROR

You attempted to set more than 998

transfer orders ( 68).

UNABLE TO RECOGNIZE THE DATA

- The disc may not be recognized by this

camcorder if it was initialized with a

different device.

- You inserted a disc recorded in a

different Television System (NTSC).

UNABLE TO RECOVER DATA

- Could not recover a corrupted file.

- This message can also appear if

condensation has formed. If you

suspect condensation is the reason, do

not initialize the disc and wait until the

camcorder dries completely before

resuming use ( 88).

UNFINALIZE THE DISC

- You cannot record additional scenes on

a finalized DVD-RW in VIDEO mode.

Unfinalize the disc first ( 48).

USE OF A RECOMMENDED DISC IS

ADVISED

- The disc can be used but performance

is not guaranteed. We recommend that

you use a disc that has been tested

(4).

Direct Print Related Messages

About Canon inkjet printers and

SELPHY DS Printers: If the printer’s

error indicator flashes or an error

message appears on the printer’s

operation panel, refer to the printer’s

instruction manual.

CANNOT PRINT!

- You attempted to print an image that

was recorded with another camcorder,

with a different compression, or was

edited on a computer.

COMMUNICATION ERROR

- The printer is experiencing a data

transfer error. Cancel printing.

Disconnect the USB cable and turn off

the camcorder and the printer. After a

short while, turn them on again, set the

camcorder to mode and

restore the connection. If you

attempted to print from a memory card

that contains a large number of images,

reduce the number of images.

COULD NOT PRINT X IMAGES

- You attempted to use the print order

settings to print X images that were

recorded with another camcorder, with

a different compression or were edited

on a computer.

FILE ERROR

- You attempted to print an image that

was recorded with another camcorder,

D126_NTSC_PAL_E.book Page 82 Tuesday, January 15, 2008 12:35 PM

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 98 99

Comments to this Manuals

No comments