Canon VB-H630D Owner's Manual download pdf (Page 70)

(5) [Video Record]

Specify the video record action. When [Enable] is

selected, video will be transmitted to the destination

selected in [Video Record Action] (p. 67) when a timer

event occurs.

(6) [E-mail Notification]

Select the e-mail notification operation to be

performed. If [Enable] is selected, e-mail notification

is performed when a timer event occurs. To use this

function, [Upload] > [E-mail Notification] must also be

set (p. 64).

(7) [External Device Output]

Select whether external device output (1 or 2) is active

or inactive when a timer event occurs. Select [Disable]

to disable output to an external device.

(8) [Day/Night Mode Switching]

Select the Day/Night Mode switching behavior when a

timer event is triggered.

Select [Switch to Day Mode] to switch to Day Mode at

the start time, and Night Mode at the end time.

Select [Switch to Night Mode] to switch to Night Mode

at the start time, and Day Mode at the end time.

Select [Disable] to disable Day/Night Mode switching.

Note

When using timers that run continuously for 24 hours with a

[Repeat Interval] of 30 seconds or less, set the timer start and

end times so the timers can run continuously.

Example:

Sound Clip Upload

(1) [Browse File]

Specify the audio file you want to register as the

sound clip, and then

click

[Add].

(2) [Sound Clip Name]

Set a name for the audio file to be registered as sound

playback (up to 15 alphanumeric characters). If a

blank field is applied, the sound clip will be deleted.

To delete a registered audio file, click [Delete] next to

the sound clip name you want to delete.

Note

Audio files must be 20 seconds or shorter and must be “.wav”

files (µ-law PCM 8 bits sampling frequency 8000 Hz, monaural).

Audio file samples are provided in the SOUND folder on the

Setup CD-ROM.

Important

• [Day/Night Mode Switching] can only be set in [Timer 1].

• [External Device Output] and [Day/Night Mode Switching] do

not support [Repeat Interval].

• When [Day/Night] in the Admin Viewer is set to [Auto], Day/

Night Mode switching will not happen when a timer event is

triggered (p. 148).

• If the [Day/Night Mode Switching] settings switch Day/Night

Mode while the Admin Viewer/VB Viewer is assigned camera

control, control will be released.

Timer [Start Time] [End Time] [Repeat Interval]

[Timer 1] 0:00 12:00 10 sec

[Timer 2] 12:00 0:00 10 sec

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 185 186

Comments to this Manuals

No comments

Canon VB-H630D Owner's Manual Page 70

Comments to this Manuals

Related products and manuals for Document cameras Canon VB-H630D