Canon FAX-L280 User Manual Page 171

  • Download
  • Add to my manuals
  • Print
  • Page
    / 212
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 170
Errors occur frequently while sending faxes.
The telephone lines may be in poor condition, or you may have a bad
connection.
Lower the transmission speed ( TX START SPEED, p. 14-10).
If none of these solutions solve the problem, unplug the FAX and wait for
at least five seconds. Then plug it back in and try sending again. If you
still cannot send, contact your local authorised Canon dealer or the Canon
help line.
Receiving Problems
Cannot receive a fax automatically.
The FAX may not be set to receive automatically.
For the FAX to receive faxes automatically, the receive mode must be
set to FAX ONLY MODE, Fax/Tel Mode, ANS.MACHINE MODE,or
NET SWITCH*(Chapter 8). If you have set ANS.MACHINE MODE,
confirm that an answering machine is connected to the FAX and that
it is turned on with an outgoing message properly recorded
( p. 8-10).
The FAX may have a document stored in memory, leaving little or no
memory available.
Print, send, or delete any documents stored in memory ( p. 9-5).
An error may have occurred during reception.
Check the LCD for an error message ( p. 13-8).
Print an ACTIVITY REPORT and check for an error code
( p. 11-3).
The multi-purpose tray may be empty.
Make sure paper is loaded in the multi-purpose tray ( p. 2-14).
The telephone line cord may not be connected properly.
Make sure it is connected properly ( p. 2-6).
No automatic switching between telephone and fax calls.
The FAX may not be set to switch automatically between telephone and fax
calls.
For the FAX to switch automatically, the receive mode must be set to
Fax/Tel Mode, ANS.MACHINE MODE,orNET SWITCH*
( Chapter 8). If you have set ANS.MACHINE MODE, confirm that an
answering machine is connected to the FAX and that it is turned on
with an outgoing message properly recorded ( p. 8-10).
The FAX may have a document stored in memory, leaving little or no
memory available.
Print, send, or delete any documents stored in memory ( p. 9-5).
* NET SWITCH is only available for Australia and New Zealand.
Chapter 13 Troubleshooting 13-15
Troubleshooting
Page view 170
1 2 ... 166 167 168 169 170 171 172 173 174 175 176 ... 211 212

Comments to this Manuals

No comments