Canon JX510P User's Guide download pdf (Page 52)

51Using TAM Mode (JX510P only)

6 Use the numeric buttons, or [{] or [}] to enter the redial interval, then press [Start/

Copy].

7 Press [Stop/Reset].

Setting ends and the fax returns to standby mode.

 Setting <PIN ENTRY>

If you set the <PIN ENTRY> setting to <ON>, you must enter a password to use the forwarding

feature (see page 51).

1 Follow steps 1 to 4 in “Setting the Forwarding Number” on page 50.

2 Use [{] or [}] to select <ON>, then press [Start/Copy]. The LCD displays <FWD

TEL NUMBER>.

3 Use [{] or [}] to select <PIN ENTRY>, then press [Start/Copy]. The LCD displays

<ON>.

4 Use [{] or [}] to select <ON>, then press [Start/Copy].

5 Press [Stop/Reset].

Setting ends and the fax returns to standby mode.

When a Forwarded Call is Received

When <FWD SETTINGS> is set to <ON>, telephone messages recorded when the fax is set to TAM

mode will be automatically forwarded to a registered forwarding number.

1 A call is received at the forwarding number.

2 When you answer the phone you will hear your forwarding message.

3 Press [#] while the forwarding message is playing.

If you have not set a forwarding message, press [#] when you hear the tone.

4 Enter your password when you hear the beeps.

z When <PIN ENTRY> is set to <OFF> (see page 51), step 4 is not required.

z If you enter an invalid password, you will hear an error tone. If you enter two invalid

passwords consecutively, the call will be disconnected.

5 Any new telephone messages will be played.

6 When playback ends, it will be possible to use the remote control features.

For the remote control features, see page 47.

7 Hang up the Handset when you have finished.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 97 98

No comments

Canon JX510P User's Guide Page 52