Canon imagePROGRAF iPF780 Basic Guide download pdf (Page 115)

Cause Corrective Action

Paper has been loaded

askew, or warped paper

has been loaded.

If "Not finished printing. Finish printing remaining jobs?" is shown on the Display Screen, press

the OK button.

Printing will resume, starting from the page on which the error occurred.

If this error recurs after you reload the roll, remove the Roll Holder from the printer, push the roll firmly in

until it touches the Roll Holder flange, and reload the Roll Holder in the printer.

(See "Attaching the Roll Holder to Rolls.") ➔ P.12

Follow these step to reload a sheet.

Push the Release Lever back.

Load the sheet, aligning it with the guide on the right.

(See "Loading Sheets in the Printer.") ➔ P.21

Pull the Release Lever forward.

If "Not finished printing. Finish printing remaining jobs?" is shown on the Display Screen, press

the OK button.

Printing will resume, starting from the page on which the error occurred.

Insufficient paper for job

Cause Corrective Action

The printer has received a print job longer than the amount of roll paper left when Man-

ageRemainRoll in the Control Panel menu is On.

Press ▲ or ▼ to select Print, and then

press the OK button to resume printing.

However, the roll paper may run out dur-

ing the print job and you may not be able

to print all of the document.

Press ▲ or ▼ to select Change Paper,

and then press the OK button to stop

printing.

Either change the printer driver Paper

Source setting or the GL2 Settings > Pa-

per Source setting in the printer menu or

replace the roll with a roll that has enough

paper for the print job, and then try print-

ing again.

(See "Removing the Roll from the Print-

er.")

➔P.18

(See "Loading Rolls in the Print-

er.") ➔P.15

Press ▲ or ▼ and select Stop Printing

or press the Stop button to stop printing.

This paper cannot be used.

Cause Corrective Action

Paper smaller than the printer's minimum suppor-

ted size has been loaded.

Push the Release Lever back and load paper of the correct size.

(See "Paper Sizes.") ➔User's Guide

Paper has been loaded that is too small to print

the test pattern for printhead adjustment or noz-

zle checking.

Push the Release Lever back and load unused paper of A4 size or larger. More

than one sheet may be required depending on the adjustment.

Roll printing is selected.

Cause Corrective Action

You have attempted to print on a roll,

but no roll is loaded.

Press ▲ or ▼ to select "Load Roll Paper", and then press the OK button. Load the roll,

and then print.

(See "Attaching the Roll Holder to Rolls.") ➔ P.12

(See "Loading Rolls in the Printer.") ➔ P.15

iPF780 Series

Insufficient paper for job

Basic Guide

Error Message Messages regarding paper

115

1 2 ... 110 111 112 113 114 115 116 117 118 119 120 ... 132 133

Comments to this Manuals

No comments

Canon imagePROGRAF iPF780 Basic Guide Page 115

Comments to this Manuals

Related products and manuals for Large format printers Canon imagePROGRAF iPF780