Canon imagePROGRAF iPF780 Basic Guide Page 92
- Page / 133
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
8
Pull the Release Lever forward.
Roll paper cannot be inserted into the paper feed slot
Roll paper cannot be inserted into the paper feed slot
Cause Corrective Action
The roll paper is warped. Straighten out curls and reload the roll.
Paper is jammed by the paper feed slot. Remove the jammed paper.
(See "Clearing Jammed Roll Paper.") ➔ P.84
(See "Clearing a Jammed Sheet.") ➔ P.87
The paper source selection is incorrect. Press the Load button and select the paper source.
Cannot load sheets
Cannot load sheets
Cause Corrective Action
The paper source selection is incorrect. Press the Load button and select the paper source.
Paper is not cut neatly
Paper is not cut neatly
Cause Corrective Action
The paper is bent or curled at the cut posi-
tion.
Straighten out any curling by the edges of the paper.
Paper rises by the ends of the cut position
before it is cut.
Reload the paper correctly.
You are using paper that cannot be cut with
the Cutter Unit.
Specify Manual in Cutting Mode in the Control Panel menu and use scissors or a
cutting tool to cut the roll after printing.
(See "Specifying the Cutting Method for Rolls.") ➔ User's Guide
Cut Speed is not configured correctly in the
Control Panel menu.
Change the Cut Speed setting in the Control Panel menu.
(See "Menu Structure.") ➔P.51
During cutting, printed documents fall out at
an angle.
In the Control Panel menu, set Cutting Mode to Eject. Hold documents after print-
ing, as they are cut.
(See "Specifying the Cutting Method for Rolls.") ➔ User's Guide
Paper is not cut
Paper is not cut
Cause Corrective Action
In the printer driver, No or Print Cut Guideline is specified
in Automatic Cutting.
Specify Yes in Automatic Cutting in the printer driver.
(See "Page Setup Sheet (Windows).") ➔User's Guide
(See "Paper Detailed Settings Dialog Box (Mac OS).") ➔ User's Guide
In the Control Panel menu, Cutting Mode is set to Eject
or Manual.
If the Cutting Mode is Eject, press the Cut button to cut the paper.
If the Cutting Mode is Manual, cut rolls with scissors or the like.
(See "Specifying the Cutting Method for Rolls.") ➔ User's Guide
Roll paper cannot be inserted into the paper feed slot
iPF780 Series
Basic Guide
Troubleshooting Problems Regarding Paper
92
- Large Format Printer 1
- Safety Precautions 2
- In an Emergency 3
- Cleaning the Printer 3
- Pacemakers 3
- Moving the Printer 3
- FCC Regulations (U.S.A) 4
- For CA, USA Only 5
- Trademarks 5
- Copyright 5
- Legal Notice 5
- Manuals for this printer 6
- About This User Manual 10
- Handling Paper 12
- No attachment 13
- Loading Rolls in the Printer 15
- Not prin 18
- Handling sheets 21
- Removing Sheets 23
- Consumables and Maintenance 25
- Remove the Ink Tank 26
- Installing Ink Tanks 27
- Important 28
- Replacing Ink Tanks 29
- Printheads 30
- Replace the Printhead 31
- Replacing the Printhead 33
- (See "Menu Set 36
- (See "Automatic Ad 36
- Maintenance Cartridge 37
- Cleaning Inside the Top Cover 43
- Cleaning the Printhead 44
- Printer Parts 46
- Control Panel 47
- Menu Operations 48
- Specifying menu items 49
- Specifying numerical values 49
- Executing menu commands 50
- Menu Structure 51
- Ink Menu 52
- Job Menu 52
- Set./Adj. Menu 53
- Printer parts 57
- (See "Stand.") 58
- Top Cover (Inside) 59
- Roll Cover (Inside) 60
- Carriage 60
- Left Side Right Side 61
- Ink Tank Cover (Inside) 61
- Printer Relocation 62
- Reinstalling the Printer 65
- Install the printer 66
- Software Installation 69
- Installing the Software 71
- Print Preview 73
- 2. Access the Main pane 74
- Width to print rotated pages 75
- Large-Format Printing 77
- Adjusting the Printhead 79
- Adjusting the feed amount 81
- Method.") ➔P.81 82
- Adjusting Line Length 83
- Troubleshooting 84
- Clearing Jammed Roll Paper 85
- Clearing a Jammed Sheet 87
- Printing does not start 94
- Lines are misaligned 102
- Cannot print over a network 103
- Installation problems 104
- HP-GL/2 problems 106
- User's Guide 107
- Other problems 108
- Ink Level Detection 109
- Basic Guide 110
- Error Message 112
- Cause Corrective Action 120
- Messages regarding ink 121
- Cannot adjust paper feed 123
- Messages regarding printheads 124
- Execute printhead cleaning 125
- Messages regarding HP-GL/2 127
- Other Messages 128
- Error Message Other Messages 129
- Error Messages 130
- Error Message Error Messages 131
- © CANON INC. 2013 133
Related products and manuals for Large format printers Canon imagePROGRAF iPF780
Large format printers Canon iPF765 Basic Guide
(132 pages)
(132 pages)
Large format printers Canon iPF770 Setup Guide
(132 pages)
(132 pages)
Large format printers Canon iPF-510 User Manual
(724 pages)
(724 pages)
Large format printers Canon iPF6000S User Manual
(730 pages)
(730 pages)
Large format printers Canon IPF810 User Manual
(814 pages)
(814 pages)
Large format printers Canon iPF 755 User Manual
(808 pages)
(808 pages)
© 2020, manymanuals.com. All rights reserved. | 5.046 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals