Canon i-SENSYS MF3010 User Manual download pdf (Page 151)

Clearing Jams

030E-03S

If the [ ] indicator is blinking, a paper jam occurs inside the printer. Follow the procedures in this section to remove

the jammed paper.

"Removing Jammed Paper"

WARNING

When removing the jammed paper

Use caution to avoid cutting your hands.

When removing jammed paper or when inspecting the inside of the machine

Do not allow necklaces, bracelets, or other metal objects to touch the inside of the machine, as this may result in burns

or electrical shock.

CAUTION

If loose toner comes into contact with your skin or clothing

Wash with cold water only. Avoid warm water, as this will set the toner and cause it to stain your skin or clothing.

When removing the jammed paper

Remove the paper carefully so that no paper fragments remain inside the machine. Also, do not put your hands in areas

other than those described in the procedure. Doing so may result in injury or burns.

Do not touch the fixing unit (A).

Touching the fixing unit (A) may cause burns as it becomes very hot during use.

IMPORTANT

If the jammed paper is torn

Remove all torn pieces of paper to avoid further jams.

If paper jams occur repeatedly

Check the following.

Fan the paper stack and tap the edge on a flat surface to align the paper before loading it into the machine.

Make sure that the paper you are using meets the requirements for use.

"Supported Paper Types"

Make sure that you have removed all scraps of paper from the inside of the machine.

Do not touch the transfer roller (A).

㻝㻡㻝㻌㻛㻌㻞㻟㻢

1 2 ... 146 147 148 149 150 151 152 153 154 155 156 ... 235 236

No comments

Canon i-SENSYS MF3010 User Manual Page 151