Canon BJC-610 User Manual Page 154

  • Download
  • Add to my manuals
  • Print
  • Page
    / 225
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 153
For letter-size paper, set it to OFF
For envelopes, set it to OFF.
For A4-size paper, set it to ON.
See Customizing the Printer in Appendix
C.
Printout does not
match paper size.
Paper size selected in driver may be
incorrect.
Make sure the paper size you select
within your printer driver matches the
orientation in which you load the paper
in the printer.
Paper width selected in driver may
be incorrect.
Make sure the width of the paper on
which you are printing matches the width
defined by your software so the paper is
always between the print head unit and
the platen.
NOTE: If the print head unit does print
on the platen, wipe it clean with a dry
cloth.
Printing incorrect
number of lines on
page
If the printer control mode is BJ
mode, DIP switch 7 may be set
incorrectly (MS-DOS only).
Check the setting of DIP switch 7. This
DIP switch determines the page length:
For letter-size paper, set it to OFF.
For envelopes, set it to OFF.
For A4-size paper, set it to ON.
See Customizing the Printer in Appendix
C.
Margin settings may be incorrect. Check the top and bottom margin
settings within your software application.
Paper may not be loaded properly. Make sure your paper is loaded
correctly.
NOTE: If your application requires 66
lines per page, try setting DIP switch 2
to ON. This enables text scale mode. See
Customizing the Printer in Appendix C
for details on the DIP switch.
Printer is not using
font you selected with
DIP switch settings
Your software may be overriding
the settings.
Change the initialization of setup string
that your software sends. You may need
to do this using a menu or screen
provided by your application software.
See your application user's manual for
information about how your software
works with your printer.
Page view 153
1 2 ... 149 150 151 152 153 154 155 156 157 158 159 ... 224 225

Comments to this Manuals

No comments