User Manual• Please read this manual before operating this scanner.• After you finish reading this manual, store it in a safe place for future referen
10STEP 4 Turning the Power ONThe power of the scanner can be turned ON and OFF with the power button on the front of the scanner.1Make sure that the s
11IntroductionThank you for purchasing the Canon imageFORMULA DR-M1060 Document Scanner. Please read the following manuals carefully and familiarize y
12Symbols Used in This ManualThe following symbols are used in this manual to explain procedures, restrictions, handling precautions, and instructions
13Table of ContentsSetup Guide ...4Introduction ...
14Before Using the ScannerImportant Safety InstructionsTo ensure the safe operation of this scanner, be sure to read the safety warnings and precautio
15Moving the Scanner● When moving the scanner, always hold it with both hands to avoid dropping it.● Make sure to disconnect the interface cable and A
16● Never place small metal objects such as staples, paper clips, or jewelry on the scanner. These items may fall into the scanner, and cause a fire o
17Features of the ScannerThe main features of the DR-M1060 document scanner are described below.● Highly Efficient Scanning with A3 CompatibilityThe f
18● Prescan FunctionThe scanner is equipped with a Prescan function that allows you to adjust the contrast and brightness of a prescanned image and th
19Names and Functions of PartsFront View (With the Feed Tray Open)A Eject SupportOpen this when scanning documents that are 150 mm (A5 horizontal) or
2FCC REGULATIONS (For 120 V model)Document Scanner, Model M111201This device complies with Part 15 of the FCC Rules. Operation is subject to the follo
20The power button lights or flashes as follows depending on the scanner status.K Feed Selection LeverUse this to change the way documents are fed.Set
21Displayed Error CodesWhen a scanning error occurs, the following error codes are displayed in the Job No. Indicator.Other DisplaysWhen the straight
22Basic OperationDocumentsThe scanner can scan documents ranging in size from business cards to A3. (Up to A1 size is possible with folio scanning in
23• Laminated documents may not be scanned correctly, depending on the document.• It is recommended that thin documents be fed one page at a time.• Sc
24How to Place DocumentsSwitching the Feed and Eject MethodsSwitch the feed and eject methods based on the type of document you are scanning.Standard
25Placing Documents1Switch the feed method based on the type of document you are scanning.When scanning plain paper or business cards, set the feed se
26When scanning documents longer the LTR horizontal (216 mm), extend the feed support and eject support extensions.5Adjust the document guides to fit
27• After you finish scanning, close the document feed tray, document eject extension support, and straight path tray to prevent damage to the scanner
283Fold the document in half.Crease the document firmly down its center to fold the document in half. Fold the document so that its edges are neatly a
291Start Windows and log in as a user with administrator privileges.2Click the Start button, and then click [All Programs], [Canon DR-M1060], and [Can
3Für EMVGDieses Produkt ist zum Gebrauch im Wohnbereich, Geschäfts-und Gewerbebereich sowie in Kleinbetrieben vorgesehen.Model NamesThe following name
30Detecting a document double feedThis scanner includes a function to detect document double feeds. By using this function, the scanner will automatic
31What to do when a double feed is detectedWhen not using the double feed detection ignore functionIf a document double feed is detected during scanni
32Detecting Skewed DocumentsThis scanner includes a function that can detect when a document has been fed at a slant. When this function is used, the
33When a skewed document is detectedFeeding automatically stops when a skewed document is detected during scanning. The following error code is also d
345Click the [OK] button and close the settings screen.6Place the document as described in “Placing Documents” (see p. 25).When a stapled document or
35Scanning methodsScanning with CaptureOnTouchWhat is CaptureOnTouch?CaptureOnTouch is a scanning application that allows you to scan a document with
36Exiting CaptureOnTouchClick at the top of the window to close the CaptureOnTouch main window. When doing so, the main window closes but CaptureOnT
373Set the scan method in the top screen.A Specify whether to enable continuous scanning. When scanning multiple documents as one scanned image or spl
385Configure the settings related to output and then output the scanned images. A Configure the settings related to output. (See p. 44)B Click this bu
392Enter the job name, and press the Enter key.HintJob numbers up to 9 are added (in numerical order) to the end of the set job name. By specifying th
4Setup GuideSTEP 1 Checking the AccessoriesIf any of the items listed below are missing or damaged, contact your local authorized Canon dealer or serv
40Hint• If you set [Enable continuous scanning] to [ON], you can continue to scan additional documents after all the pages of the initial document are
41When [Check output after scanning] is set to [ON]The Output Confirmation screen appears before the scanned images are output.Change the settings for
42When Select Scan Job:For Select Scan Job, configure the scanner settings for each job.Setting Basic ItemsScanner settings include the basic items th
43HintThe driver settings dialog box includes setting items that are the same as the basic items in [Scanner Settings], but the setting for each of th
44C Preview ControlsControl the preview images and cancel or continue scanning with the following buttons.Setting the Output MethodCaptureOnTouch is p
45PrintPrints the scanned images with a specified printer. When you specify this output method, specify the printer for printing.Send to applicationSa
46Back Up / RestoreUse the [Back Up] and [Restore] buttons to back up the configuration file (settings, registered jobs, etc.) of CaptureOnTouch and r
47[Plugin] TabOn the [Plugin] tab, confirm the plugins that have been added to CaptureOnTouch.[Maintenance] tabWith the [Maintenance] tab, you can out
48Scanning with CapturePerfectScanning with CapturePerfectThis section describes procedures from launching CapturePerfect to selecting a scanner, as w
496Configure the scanning conditions. (See p. 50)7Place the document. (See p. 24)8Click [Scan Batch to File] in the [Scan] menu.9Configure the save de
5Setup Disc ContentsInstall the following software necessary for using the scanner from the supplied Setup Disc.• CaptureOnTouchThis is a dedicated sc
50Setting the Scanner DriverWhen you scan a document in an ISIS compatible application (CapturePerfect, etc.) or TWAIN compatible application (Capture
51Adjust the brightness and contrast of scanned images.In addition, you can also click [Gamma] and set the gamma correction value for scanned images.[
52Setting Basic Scanning ConditionsThis section provides an overview of the basic setting items that are the minimum requirements when configuring the
53Dots per inchSelect the scanning resolution.• Higher resolutions provide clearer images but result in larger file sizes and slower scanning.• When [
54• When [Speed priority] is selected, a 400-/600-dpi image is generated from the image scanned at 300 dpi. The scanning speed will be faster, but the
55Configuring Scanner Settings According to PurposeSet the scanning conditions according to the scanning purpose.When you want to delete the images of
56When you want to enhance contours in imagesAdjust the edge emphasis setting on the [Image processing] tab.When you want to make lines and text in sc
57When you want to detect multiple pages fed at the same timeSelect the [Double Feed Detection] check box on the [Feeding] tab. You can enable either
58When you want to use batch separation for scanningWhen you want to divide and scan a document, you can separate a batch at the timing with which eac
59A When you want to specify different scanning conditions for the front and back pages of a document, select [Skip Blank Page] or [Both] for [Scannin
6STEP 2 Installing the SoftwareSystem requirementsTo use the scanner, your computer must satisfy the following system requirements.ComputerCPU: Intel
60• Select the [Erase Notch] check box to remove notches that protrude from object outlines in scanned images.When you want to save a scanner driver s
61Function Restrictions Depending on Mode SettingSome of the setting items in each of the driver tabs are disabled as follows depending on the setting
62More Advanced Scanning MethodsUsing a Patchcode for ScanningDR-M1060 supports batch separation (automatic file separation) functions by using patchc
63IMPORTANT• Patchcodes must be printed in their normal size. If patchcodes are enlarged or reduced, they may not be recognized correctly.• When copyi
64When using other ISIS-compatible applications, open the scanner driver settings screen and select [Patchcode] in [Batch Separation] on the [Others]
65MaintenanceDaily MaintenanceClean the scanner on a regular basis, as described below, to maintain peak scanning quality.CAUTION• When cleaning the s
662Raise the OPEN lever, and open the upper unit.3Use a dry cloth, for example, to remove dust and paper particles from the inside of the scanner.Use
675Clean the rollers.Clean the rollers while turning them.Wipe the rollers with a cloth that has been dampened with water and thoroughly wrung out, an
6810Close the document feed tray.Adjusting the Reduction RatioAs the rollers installed in the scanner wear out, scanned images may become stretched in
693Click [Canon DR-M1060 USB] and click [Properties].Scanner properties are displayed.4Click the [Maintenance] tab and then change the value of [Reduc
7Software InstallationIMPORTANT• Install the software before connecting the scanner to the computer.• Log on to Windows as an Administrator.• Close al
702Raise the OPEN lever, and open the upper unit.HintThe location of each of the consumable parts is shown below.3Close the upper unit by gently pushi
71Replacing the Retard RollerTEMPERATURE WARNINGThe inside of the scanner can become very hot after continuous operation. Do not touch the scanning gl
726Press the roller cover to close it.Replacing the Feed Roller1Lift the securing lever for the feed roller forward.2Slide the securing lever for the
736Attach the left side of the feed roller, and slide the securing lever for the feed roller to the right.7Raise the feed roller toward the back until
744Click the [Maintenance] tab and then select [Reset].The counter for [Current Rollers] resets.5Click [OK] to close the scanner properties.Auto Power
75imageFORMULA Utility starts.3Click [Canon DR-M1060 USB] and click [Properties].Scanner properties are displayed.4Click the [Maintenance] tab and the
76 TroubleshootingCommon Problems and SolutionsThis section provides recommended solutions to common problems.If you have a problem that is not solved
77Problem 8 Scanned images are saved in TIFF instead of JPEG format.Solutions When documents are scanned with CapturePerfect while [Color Mode] is set
78Software TroubleshootingThis section describes troubleshooting problems and solutions for operating the supplied software (CaptureOnTouch and Captur
79Useful tipsHere are some useful tips for scanning documents.Where are scanned images saved? Can the save destination be changed?Images are saved to
84Follow the instructions on the screen to complete installation.HintInstalling the EMC Cloud Capture FunctionEMC Captiva Cloud Runtime provides compo
80CapturePerfectThe rules for the file names of scanned images and the folder in which scanned images are saved can be set and then applied during sca
81Clearing Paper Jams, Skewed Documents, Stapled Documents, and Feed ErrorsWhen paper jams and skewed documents are detected during scanning, the foll
823Remove the jammed document.TEMPERATURE WARNINGThe inside of the scanner can become very hot after continuous operation. Do not touch the scanning g
83Uninstalling the SoftwareIf the ISIS/TWAIN driver, CaptureOnTouch or CapturePerfect is not operating normally, follow the procedure below to uninsta
84AppendixSpecificationsMain UnitType Desktop sheetfed scannerScanning Document SizePlain PaperSize Width: 50.8 mm to 300 mm (2" to 11.8")Le
85Humidity: 20% to 80% RHAC Adapter (100 to 240 V type)Model Number MG1-4558Input AC100 to 240V, 50/60 Hz, 1.1 to 0.58 AOutput DC24V 2.0AWeight Appro
86Dimensions246 mm(9.7")424 mm (16.7")440 mm (17.3")210 mm (8.3")120 mm (4.7")
87IndexAAdjusting the Reduction Ratio ... 68Auto Power Off Setting ...
CANON ELECTRONICS INC.1248, SHIMOKAGEMORI, CHICHIBU-SHI, SAITAMA 369-1892, JAPANCANON U.S.A. INC.ONE CANON PARK, MELVILLE, NY 11747, U.S.A.CANON CANAD
9STEP 3 Connecting to a ComputerConnect the scanner to the computer and the power supply.IMPORTANT• Do not connect the scanner to the computer before
Comments to this Manuals