Canon DR-M1060 User Manual download pdf (Page 41)

When [Check output after scanning] is set to [ON]

The Output Confirmation screen appears before the scanned images

are output.

Change the settings for the output method if necessary and then click

the output button. The name of the output button differs for each

selected output method.

Operating the scanner with the

operating panel buttons

You can start scanning by selecting a job from the scanner’s operating

panel.

Set a job number every time a job is registered with

CaptureOnTouch.

Place the document in the scanner.

Press the Job Select button in the operating panel to

display the required job number in the Job No. Indicator.

The job numbers of jobs displayed in the operating panel are

allocated as follows.

Press the Start button in the operating panel.

CaptureOnTouch is launched and the scanning of the selected job

starts.

Hint

When scanning jobs selected with the operating panel buttons,

the CaptureOnTouch main window automatically closes 5

seconds after the output process finishes.

Scanner Settings

By default, CaptureOnTouch scans with scanning conditions that

match the document because scanning in full auto mode is enabled.

If you want to specify, for example, the scanning mode and document

size, you can configure the desired scanning conditions in the scanner

settings.

The scanner setting items are common to Scan First and Select Scan

Job.

When Scan First:

For Scan First, configure the scanner settings before you start

scanning.

Job No. Job

1 Scan First (default / modifiable)

2 to 9 Jobs registered with CaptureOnTouch.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 87 88

No comments

Canon DR-M1060 User Manual Page 41