Canon DR-M1060 User Manual download pdf (Page 82)

Remove the jammed document.

TEMPERATURE WARNING

The inside of the scanner can become very hot after continuous

operation. Do not touch the scanning glass and metallic portions

of the retard roller directly.

Be sure to allow sufficient cooling before performing cleaning or

replacement.

IMPORTANT

Make sure to pull the document out carefully, without applying too

much force. If the jammed paper tears while you are pulling it out,

make sure to remove any remaining pieces from inside the

scanner.

Close the upper unit by gently pushing down on the left

and right sides. Push until it clicks into place to make

sure that it is completely closed.

After removing the jammed paper, check to see if the last page

was scanned correctly, and then continue scanning.

Hint

When the [Rapid recovery system] check box is enabled in the

scanner driver settings screen, you can resume a scanning operation

even if it is interrupted by a paper jam by removing the document and

resuming from the document that was being fed when the interruption

occurred.

As the image of the document that was being fed at the time of the

interruption may not be saved in such cases, be sure to verify the last

scanned image before resuming the operation.

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 88

No comments

Canon DR-M1060 User Manual Page 82