Canon DR-M1060 User Manual download pdf (Page 28)

Fold the document in half.

Crease the document firmly down its center to fold the document

in half. Fold the document so that its edges are neatly aligned. If

the document is not folded properly, paper jams may occur or

distortions may appear in the combined scanned image.

IMPORTANT

A portion of the scanned image will be missing at the fold line.

Place the document with the folded edge facing right.

After placing the document, align the document guides with both

edges of the document.

IMPORTANT

Adjust the document guides to fit the width of the document.

Otherwise, the image may scan as skewed or shifted.

Hint

• The front side of the folded document will appear on the left side of

the combined image.

• The maximum size for the combined image is A1. When scanning a

folded document of a size other than the standard formats, set

[Page Size] on the scanner driver settings screen to [Match original

size]. (See p. 42)

Setting the Long Document Mode

The length of documents that can be scanned with the scanner is

normally 432 mm (17"), but you can scan documents up to 3,000 mm

(118.1") long by setting the scanner to the Long Document mode.

IMPORTANT

By selecting the Long Document mode and setting the [Paper Size]

in the scanner driver settings screen to auto-detection, documents of

up to 3,000 mm (118.1") (2,700 mm (106.3") with 600 dpi) in length

can be scanned. Note the following when using the Long Document

mode:

• When scanning in the Long Document mode, if the document is

placed on the scanner in a skewed position, it may hit the edges of

the feeding area and be damaged. Be careful to place the

document so that it is not skewed.

• When scanning with the Long Document mode, paper jam

detection may react slowly, resulting in damage to the document.

Be careful to avoid paper jams.

• When scanning long documents, make sure to set the feed

selection lever to “non separation feeding mode,” and scan the

documents one page at a time.

• When scanning large-sized documents with the Long Document

mode, scanning may be slower. Errors also occur due to memory

shortage, and scanning may be disabled.

• Be careful when scanning paper that is longer than A3 or letter

(LTR) size or thin paper, as the documents may fall off of the eject

tray after scanning.

Front Back

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 87 88

Comments to this Manuals

No comments

Canon DR-M1060 User Manual Page 28

Comments to this Manuals

Related products and manuals for Scanner Transparancy Adapters Canon DR-M1060