Canon DR-M1060 User Manual download pdf (Page 66)

Raise the OPEN lever, and open the upper unit.

Use a dry cloth, for example, to remove dust and paper

particles from the inside of the scanner.

Use compressed air to remove any dust that cannot be removed

with the cloth.

Wipe any dirt off the scanning glass.

Wipe any dirt off the scanning glass with a cloth that has been

dampened with water and thoroughly wrung out, and then wipe

the glass dry with a clean, dry and soft cloth.

CAUTION

Do not spray water or neutral detergent directly on the scanner.

Precision mechanisms, such as the light source, may get wet,

and cause a malfunction.

TEMPERATURE WARNING

The inside of the scanner can become very hot after continuous

operation. Do not touch the scanning glass and metallic portions

of the retard roller directly.

Be sure to allow sufficient cooling before performing cleaning or

replacement.

IMPORTANT

Scratches on the sensor glass may cause marks on the images,

as well as feeding errors. If there are scratches on the sensor

glass, contact your local authorized Canon dealer or service

representative.

Scanning Glass

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 87 88

No comments

Canon DR-M1060 User Manual Page 66