Canon EOS 6D Mark II User Manual Page 106

  • Download
  • Add to my manuals
  • Print
  • Page
    / 610
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 105
C Creative Auto Shooting
106
5
Set [Background Blur].
Press the <Q> button to exit the
Quick Control.
Turn the <6> or <5> dial to adjust
the blur while checking it on the
screen (p.103). While you adjust it,
[Simulating blur] will be displayed.
6
Take the picture.
Press the shutter button completely.
To return to viewfinder shooting,
press the <0> button to exit Live
View shooting.
The Live View image shown with the ambience setting applied will not
look exactly the same as the captured image.
If the <g> icon (p.293) blinks during [Simulating blur], the simulated
image displayed may have more noise or may be darker than the actual
image being recorded.
If you use an external flash, the ambience effect may look less
pronounced.
In bright outdoors, the Live View image you see on the LCD monitor may
not have the same brightness or ambience as the actual image captured.
Set the brightness of the LCD monitor to the level “4” under [52: LCD
brightness] to avoid ambient brightness as much as possible when
checking the resulting effect.
If you change the shooting mode or turn the power switch to <2>, the
[Ambience], [Background blur], [Drive mode], and [AF point
selection] settings will revert to their default settings.
<8> Mode [Brightness] and [Color tone]
When the Mode Dial is set to the <8> mode, you can adjust the
[Brightness] and [Color tone] with the shooting mode. In step 3, when you
select [Brightness] or [Color tone], you can adjust the [Brightness] to
Darker/Brighter (3 steps each) or the [Color tone] to Cool tone/Warm tone
(2 steps each) while watching the Live View image.
Page view 105
1 2 ... 101 102 103 104 105 106 107 108 109 110 111 ... 609 610

Comments to this Manuals

No comments