Canon EOS 6D Mark II User Manual Page 522

  • Download
  • Add to my manuals
  • Print
  • Page
    / 610
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 521
522
With a commercially-available Eye-Fi card already set up, you can
automatically transfer captured images to a computer or upload them to
an online service via a wireless LAN.
The image transfer is a function of the Eye-Fi card. For instructions on
how to set up and use the Eye-Fi card or to troubleshoot any image
transfer problems, refer to the Eye-Fi card’s instruction manual or
contact the card manufacturer.
1
Insert an Eye-Fi card (p.43).
2
Select [Eye-Fi settings].
Under the [51] tab, select [Eye-Fi
settings], then press <0>.
This menu is displayed only when an
Eye-Fi card is inserted into the
camera.
3
Enable Eye-Fi transmission.
Select [Eye-Fi trans.], then press
<0>.
Select [Enable], then press <0>.
If you set [Disable], there will be no
automatic transmission even with the
Eye-Fi card inserted (transmission
status icon I).
H Using Eye-Fi Cards
The camera is not guaranteed to support Eye-Fi card functions
(including wireless transfer). In case of a problem with an Eye-Fi card,
please check with the card manufacturer. Also note that approval is
required to use Eye-Fi cards in many countries or regions. Without
approval, use of the card is not permitted. If it is unclear whether the
card has been approved for use in your area, please check with the
card manufacturer.
Page view 521
1 2 ... 517 518 519 520 521 522 523 524 525 526 527 ... 609 610

Comments to this Manuals

No comments