Canon FS10 User Manual download pdf (Page 17)

17

1 Disconnect the compact power

adapter from the camcorder.

2 Unplug the power cord from the

power outlet and the compact

power adapter.

1 Slide the battery compartment

cover away from the lens and

open it.

2 Press the battery release latch and

pull out the battery pack.

3 Close the cover and slide it toward

the lens until you hear a click.

IMPORTANT

• Turn off the camcorder before

connecting or disconnecting the

compact power adapter. After turning

off the camcorder, important data is

updated in the memory. Be sure to wait

until the indicator turns off.

• We recommend charging the battery

pack in temperatures between 10 °C

and 30 °C. Outside the temperature

range of 0 °C to 40 °C, the charging will

not start.

• Do not connect to the camcorder’s DC

IN terminal or to the compact power

adapter any electrical equipment that is

not expressly recommended for use

with this camcorder.

• To prevent equipment breakdowns and

excessive heating, do not connect the

supplied compact power adapter to

voltage converters for overseas travels

or special power sources such as those

on aircraft and ships, DC-AC inverters,

etc.

NOTES

• If remaining battery time is an issue, you

can power the camcorder using the

compact power adapter so the battery

pack will not be consumed.

• Charged battery packs continue to

discharge naturally. Therefore, charge

them on the day of use, or the day

before, to ensure a full charge.

• We recommend that you prepare battery

packs to last 2 to 3 times longer than

you think you might need.

ONCE THE BATTERY PACK IS FULLY CHARGED

TO REMOVE THE BATTERY PACK

Battery release latch

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 104 105

Comments to this Manuals

No comments