Canon Rebel Ti 300V User Manual download pdf (Page 17)

How the Shutter Button Works

The EOS camera’s shutter button can be depressed halfway or all the

way. There Is a click stop at the halfway point.

Pressing the Shutter Button Halfway or Fully

The shutter button works as described below

When it is pressed halfway:

• Autofocusing (AF) Is activated. When

the subject is in focus, the AF point

which achieved focus will flash, the

beeper will sound, and the focus

confirmation light will light up.

• Also, the shutter speed and aperture

are set and displayed on the LCD

panel and in the viewfinder.

When it is pressed fully;

• The shutter is released to take the

picture and the film advances by one

frame.

If an Extender is used and the maximum aperture of the lens becomes small

er than f/5.6 (the lowest f/number), autofocusing will not operate.

Camera movement during the moment of exposure is called camera shake.

Camera shake can cause blurred pictures To prevent blurred pictures due to

camera shake:

■ Hold the camera steady (^page 20).

• Use your finger tip to touch the shutter button, grasp the camera with your

entire right hand, then press the shutter button gently.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 59 60

No comments

Canon Rebel Ti 300V User Manual Page 17