Canon Rebel Ti 300V User Manual download pdf (Page 23)

Take the picture.

• Compose the shot and press the

shutter button fully

If the built-in flash’s automatic pop-up action is obstructed accidentally, the

<ca> icon will blink on the LCD panel as a warning. If this happens, press

the shutter button halfway to return the camera to normal operation

' When focus is achieved, the autofocus and auto exposure setting will also

be locked.

' If the focus confirmation light < • > blinks, the picture cannot be taken (-^page 34)

' Out of the seven AF points, the one covering the closest subject is selected

automatically to achieve focus.

‘ If multiple AF points flash in red, it means that all of them have achieved

focus at the respective points.

' In the Basic Zone modes (except <^>, > and <IS > ), the built-in

flash will pop up and fire automatically in low-light or backlit conditions. To

retract the flash, push it back down For more information on the flash, see

“Using the Built-in Flash" on page 49

' In the Basic Zone modes, the film advance mode (single frame or continu

ous) will be set automatically depending on the shooting mode. For more

information, see the “Feature Availability Table" on page 54

AF-Assist beam with the Built-in Flash

Under low-light conditions, the built-in flash fires a brief burst of flashes

when you press the shutter button halfway. This is to illuminate the sub

ject to enable easier autofocusing.

' The AF-assist beam does not function in the <Sk >, > and < m > modes.

' The built-in flash’s AF-assist beam is effective up to about 4 meters/13.2 feet.

■ In the Creative Zone modes when the built-in flash is popped up with the < V >

button, the AF-assist beam may be emitted.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 59 60

No comments

Canon Rebel Ti 300V User Manual Page 23