Canon Rebel Ti 300V User Manual download pdf (Page 19)

The shutter curtains have been manufactured with very high precision.

Never touch them with your fingers. When ioading film, do not touch or dam

age the curtains with your fingers or film.

In hot and humid environments, do not remove the film packaging until you

are ready to load the film,

' if the film is not loaded properly, the <@> icon will blink on the LCD panel

and the shutter will not work. Reload the film cartridge properly, (^page 18)

- If you want to set a film speed different from the DX-coded film speed or if

the film cartridge is not DX-coded, see “Setting the ISO Film Speed" on

page 50

‘ Infrared film cannot be used with this camera

Checking the Film Speed

The camera reads the film cartridge's DX code and sets the film speed

automatically within ISO 25 - 5000.

* Set the Command Dial to a Creative Zone mode.

Press the <FUNC.> button and

move the <►> arrow to <ISO> on

the LCD panel.

► The film speed will appear on the

LCD panel.

Unloading Film

After the film's last frame is exposed, the camera rewinds the film automatically.

After the film is rewound, there will be a

shutter-release sound. Check that the

<@> icon is blinking on the LCD panel,

then open the back cover and take out

the film cartridge.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 59 60

No comments

Canon Rebel Ti 300V User Manual Page 19