Canon LBP-2000 Service Manual download pdf (Page 120)

CHAPTER 3

3 - 10

4 . Mounting the RAM DIMM (option)

Caution: The RAM DIMM must be one spe-

cifically designed for the Printer.

The location of the cut-off differs

between regular RAM DIMMs and

one designed for the Printer.

SDRAM DIMM (3.3 V) for Printer

Cut-off

May be used.

RAM DIMM (3.3 V, 5 V) for others

Cut-off

Must not be used.

Figure 3-2-8

1) Holding it so that the cut-off [1] faces

downward, insert the RAM DIMM [2]

along the guide groove.

[1]

[2]

Figure 3-2-9

2) Check to make sure that the lever [3] is

at the same position as the slot [4].

[3]

[4]

[3]

[4]

Figure 3-2-10

5 . Mounting the ROM DIMM (option)

Caution: The ROM DIMM must be one spe-

cifically designed for the Printer.

It differs from common ROM

DIMMs as follows:

ROM DIMM (3.3 V) for Printer

May be used.

4 mm (approx.)

3 mm (approx.)

ROM DIMM (3.3 V) for others

Must not be used.

2mm (approx.)

2.5 mm (approx.)

ROM DIMM (5 V) for others

4 mm (approx.)

Must not be used.

Figure 3-2-11

Download Service Manual And Resetter Printer at http://printer1.blogspot.com

1 2 ... 115 116 117 118 119 120 121 122 123 124 125 ... 221 222

Comments to this Manuals

No comments

Canon LBP-2000 Service Manual Page 120

Comments to this Manuals

Related products and manuals for Print & Scan Canon LBP-2000