Canon LBP-2000 Service Manual download pdf (Page 28)

CHAPTER 1

1 - 22

VII. ROUTINE MAINTENANCE/INSPECTION BY THE USER

To ensure that the Printer remains in its best condition, advise the user to provide the following

maintenance:

1 . Cartridge

If the images are fuzzy or show white spots, or the cartridge is running out of toner, shake or

replace the cartridge.

2 . Cassette pickup poller/cassette separation pad

If pickup faults tend to occur, wipe the pickup roller/separation pad with a cloth moistened with

water, and then dry wipe it. If the faults still occur, replace both cassette pickup roller and cassette

separation pad at the same time (at about 80,000th page; see Chapter 3 IV-A-1/2 “Replacing the

Cassette Pickup Roller” and “Replacing the Cassette Separation Pad.”)

3 . Fixing roller

If the back or face of printed sheets have black dots, clean the fixing roller as follows:

1) Prepare an A4 or LTR sheet of paper for printing.

2) Press the Go key so that the Printer enters off-line state.

3) Press the Menu key until the status indicator panel indicates ‘TEST MENU’.

4) Press the Item key until the status indicator panel indicates ‘TEST MENU CLEANING PAGE’.

Then, press the Enter key so that a cleaning sheet (Figure 1-7-1) will be printed.

Figure 1-7-1

5) Press the Go key so that the Printer enters on-line state, then press the Menu key.

6) Open the multifeeder tray, and place the cleaning sheet generated in step 2) with its arrow side

facing upward and the arrow pointing at the rear of the Printer.

Figure 1-7-2

Download Service Manual And Resetter Printer at http://printer1.blogspot.com

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 221 222

No comments

Canon LBP-2000 Service Manual Page 28