Canon imagePROGRAF iPF6450 User Manual Page 121
- Page / 159
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
7
Close the Top Cover.
The contrast becomes uneven during printing
The contrast becomes uneven during printing
Cause Corrective Action
The paper feed amount is out of adjustment. Adjust the feed amount.
(See "Adjusting the Feed Amount.") →User's Guide
The type of paper specified in the printer driver
does not match the type loaded in the printer.
Load paper of the same type as you have specified in the printer driver.
(See "Loading Rolls in the Printer.") →P.11
(See "Loading Sheets in the Feed Slot.") →P.18
Make sure the same type of paper is specified in the printer driver as you have loaded
in the printer.
1.
Press the Stop button and stop printing.
2.
Change the type of paper in the printer driver and try printing again.
The length of printed images is inaccurate in the feeding direction
The length of printed images is inaccurate in the feeding direction
Cause Corrective Action
In the Control Panel menu, Adj. Priority is
set to Print Quality.
Set Adj. Priority to Print Length in the Control Panel menu, and then execute Adjust
Length.
(See "Adjusting the Feed Amount.") →User's Guide
The type of paper specified in the printer driv-
er does not match the type loaded in the
printer.
Load paper of the same type as you have specified in the printer driver.
(See "Loading Rolls in the Printer.") →P.11
(See "Loading Sheets in the Feed Slot.") →P.18
Make sure the same type of paper is specified in the printer driver as you have loaded in
the printer.
1.
Press the Stop button and stop printing.
2.
Change the type of paper in the printer driver and try printing again.
Images are printed crooked
Images are printed crooked
Cause Corrective Action
In the Control Panel menu, Skew Check Lv. is set to Loose or
Off.
In the Control Panel menu, set Skew Check Lv. to Standard.
(See "Menu Settings.") →User's Guide
In the Control Panel menu, Width Detection is set to Off. Set Width Detection to On in the Control Panel menu.
(See "Menu Settings.") →User's Guide
Roll paper is loaded askew. If there is a gap between the roll paper and roll holder, reload the roll.
(See "Loading Rolls on the Roll Holder.") →P.9
(See "Loading Rolls in the Printer.") →P.11
iPF6450
The contrast becomes uneven during printing
Basic Guide
Troubleshooting Problems with the printing quality
121
- Basic Guide 1
- Safety Precautions 2
- In an Emergency 3
- Cleaning the Printer 3
- Pacemakers 3
- Moving the Printer 3
- FCC Regulations (U.S.A) 4
- For CA, USA Only 5
- Trademarks 5
- Copyright 5
- Legal Notice 5
- Manuals for this printer 6
- About This User Manual 7
- Handling Paper 9
- Handling Paper Handling rolls 11
- →User's Guide (HTML) 12
- Manually.") →P.16 13
- Handling sheets 18
- Consumables and Maintenance 31
- Confirm the message 32
- Remove the Ink Tanks 33
- Installing Ink Tanks 35
- Replacing Ink Tanks 37
- Printheads 38
- Replace the Printhead 40
- Replacing the Printhead 41
- Maintenance Cartridge 45
- Cleaning the Printhead 53
- Cleaning the Paper presser 59
- Printer Parts 61
- Menu Operations 62
- Accessing menus 63
- Specifying menu items 64
- Specifying numerical values 64
- Executing menu commands 65
- Menu Structure 66
- Ink Menu 67
- Job Menu 67
- Set./Adj. Menu 68
- Printer parts 72
- Top Cover (Inside) 73
- Paper Feed Slots 74
- Carriage 75
- Ink Tank Cover (Inside) 76
- • Do not block these vents 77
- Printer Relocation 78
- Remove the Ink Tank 79
- Pack the printer 80
- Reinstalling the Printer 82
- Install the printer 83
- Software Installation 86
- Installing the Software 88
- 2. Access the Main pane 91
- Borderless Printing 93
- Enlarged/Reduced Printing 95
- Starting from Adobe Photoshop 96
- Adjusting the Printhead 97
- Adjusting the feed amount 99
- Automatic Banding Adjustment 101
- Troubleshooting 102
- Clearing Jammed Roll Paper 103
- (See "Clearing 105
- Important 107
- (Paper Feed Slot).") 108
- →User's Guide 110
- Printing does not start 111
- Cause Corrective Action 112
- Printing is faint 113
- Number Dimensions Paper Size 120
- Close the Top Cover 121
- Cannot print over a network 125
- Installation problems 127
- Other problems 129
- Ink level detection 130
- Releasing ink level detection 130
- Ink Level Detection 131
- Error Message 133
- Messages regarding ink 142
- Paper Reference Guide .) 144
- Messages regarding printheads 149
- Other Messages 154
- Error Message Other Messages 155
- Error Messages 156
- Error Message Error Messages 157
Related products and manuals for Printers Canon imagePROGRAF iPF6450
Printers Canon imagePROGRAF iPF650 User Manual
(878 pages)
(878 pages)
Printers Canon PIXMA PRO-1 User Manual
(34 pages)
(34 pages)
Printers Canon imagePROGRAF iPF815 User Manual
(960 pages)
(960 pages)
Printers Canon imagePROGRAF iPF6400S User Manual
(164 pages)
(164 pages)
Printers Canon PIXMA iP2702 User Manual
(24 pages)
(24 pages)
Printers Canon imagePROGRAF iPF6400 User Manual
(142 pages)
(142 pages)
Printers Canon PIXMA PRO-1 User Manual
(34 pages)
(34 pages)
Printers Canon imagePROGRAF iPF765 User Manual
(132 pages)
(132 pages)
© 2020, manymanuals.com. All rights reserved. | 2.100 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals